KAYDON KG350XP0 bearings
KG350XP0 KAYDON, 35.0" Bore, 37.0" Outside Diameter, 1.0" Width, Thin section four-point contact bearing

Inquiry for price
Reali-Slim thin section four-point contact ball bearing
Measurement system
Inch
Bore diameter
889.000 mm
Outside diameter
939.800 mm
Width
25.400 mm
Cr
102000 N
C0r
263000 N
Net weight
12.3 kg
Number of rows
1
Contact angle deg
30
Sealing
Without
Cage
Brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
ABEC 1F

In stock

Technical specification for KAYDON KG350XP0

KAYDON KG350XP0
Part Number KG350XP0
Type Reali-Slim thin section four-point contact ball bearing (type X)
Contact angle 30°
Cage Brass
Material Bearing steel
Dimensions
d 889.0 mm Bore diameter
D 939.8 mm Outside diameter
H 25.4 mm Radial cross section
B 25.4 mm Width
d1 ≈907.847 mm Shoulder diameter inner ring
D1 ≈920.953 mm Shoulder diameter outer ring
12.7 mm Ball diameter
2.032 mm Maximum radius of shaft or housing fillet
Calculation data
Ck 102.0 kN Dynamic load rating, Kaydon, radial direction
C0 263.0 kN Basic static load rating, radial direction
C0a 657.0 kN Basic static load rating, axial direction
CM 34.859 kN•m Basic dynamic load rating, moment
C0M 120.216 kN•m Basic static load rating, moment
Reali-Slim thin section four-point contact ball bearing

KAYDON KG350XP0, Reali-Slim thin section four-point contact ball bearing (type X), KG series; 35.0" Bore, 37.0" Outside Diameter, 1.0" Width, 1.0 radial cross section. KAYDON KG350XP0 can accommodate radial and axial loads simultaneously, and require considerably less axial space than two angular contact ball bearings.

  • K: AISI 52100 Steel, No seals or shields
  • G: Radial cross section 1.0 inches, Width 1.0 inches
  • 350: Inner diameter 35.0 inches
  • X: Four-point contact ball bearing
  • P: One-piece, snap-type, stamped brass cage
  • 0: Tolerance to Kaydon class 1 (ABEC 1F)
Comments

Related products

KAYDON KG350AR0 bearings
KAYDON KG350AR0 bearings

Brand: KAYDON
Reali-Slim thin section angular contact ball bearing
Dimensions: 889x 939.800x 25.400mm