KAYDON KG350AR0 bearings
KG350AR0 KAYDON, 35.0" Bore, 37.0" Outside Diameter, 1.0" Width, Thin section angular contact ball bearing
- Measurement system
- Inch
- Bore diameter
- 889.000 mm
- Outside diameter
- 939.800 mm
- Width
- 25.400 mm
- Cr
- 80000 N
- C0r
- 304000 N
- Net weight
- 11.9 kg
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Without
- Cage
- Brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- ABEC 1F
In stock
Technical specification for KAYDON KG350AR0
| Part Number | KG350AR0 | |
|---|---|---|
| Type | Reali-Slim thin section angular contact ball bearing (type A) | |
| Contact angle | 30° | |
| Cage | Brass | |
| Material | Bearing steel | |
| Dimensions | ||
| d | 889.0 mm | Bore diameter |
| D | 939.8 mm | Outside diameter |
| H | 25.4 mm | Radial cross section |
| B | 25.4 mm | Width |
| d1 | ≈907.847 mm | Shoulder diameter inner ring |
| D1 | ≈920.953 mm | Shoulder diameter outer ring |
| D4 | ≈925.576 mm | Shoulder diameter outer ring |
| 12.7 mm | Ball diameter | |
| 2.032 mm | Maximum radius of shaft or housing fillet | |
| Calculation data | ||
| Ck | 80.0 kN | Dynamic load rating, Kaydon, radial direction |
| C0 | 304.0 kN | Basic static load rating, radial direction |
| C0a | 876.0 kN | Basic static load rating, axial direction |
KAYDON KG350AR0, Reali-Slim thin section angular contact ball bearing (type A), KG series; 35.0" Bore, 37.0" Outside Diameter, 1.0" Width, 1.0" radial cross section. KAYDON KG350AR0 can accommodate radial and axial loads acting simultaneously, where the axial load acts in only one direction.
- K: AISI 52100 Steel, No seals or shields
- G: Radial cross section 1.0 inches, Width 1.0 inches
- 350: Inner diameter 35.0 inches
- A: Angular contact ball bearing (not ground for universal matching)
- R: One-piece, circular pocket, stamped brass cage
- 0: Tolerance to Kaydon class 1 (ABEC 1F)
- Log in to post comments
Related products
KAYDON KG350XP0 bearings
Brand: KAYDON
Reali-Slim thin section four-point contact ball bearing
Dimensions: 889x 939.800x 25.400mm