KAYDON JU090XP0 bearings
JU090XP0 KAYDON, 9.0 in Bore, 9.75 in Outside Diameter, 0.5 in Width, Four-point contact ball bearing (type X)

Inquiry for price
KAYDON JU090XP0
Measurement system
Inch
Bore diameter
228.600 mm
Outside diameter
247.650 mm
Width
12.700 mm
Cr
9900 N
C0r
20100 N
Limiting speed
220 r/min
Net weight
0.535 kg
Number of rows
1
Contact angle deg
30
Sealing
Seal on both sides
Cage
Brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
ABEC 1F
Lubricant in bearing
Grease
Relubrication feature
Without

In stock

Technical specification for KAYDON JU090XP0

KAYDON JU090XP0
Part Number JU090XP0
Type Reali-Slim thin section four-point contact ball bearing with seals (type X)
Contact angle 30°
Cage Brass
Sealing Seal on both sides
Material Bearing steel
Dimensions
d 228.6 mm Bore diameter
D 247.65 mm Outside diameter
H 9.525 mm Radial cross section
B 12.7 mm Width
d2 ≈232.41 mm Recess diameter inner ring
D2 ≈242.392 mm Recess diameter outer ring
4.763 mm Ball diameter
0.381 mm Maximum radius of shaft or housing fillet
Calculation data
Ck 9.9 kN Dynamic load rating, Kaydon, radial direction
C0 20.1 kN Basic static load rating, radial direction
C0a 50.1 kN Basic static load rating, axial direction
CM 0.885 kN·m Basic dynamic load rating, moment
C0M 2.387 kN·m Basic static load rating, moment
1.469 N·m Starting torque max. no load
220.0 r/min Limiting speed
Reali-Slim thin section four-point contact ball bearing with seals

KAYDON JU090XP0, Reali-Slim thin section four-point contact ball bearing with seals (type X); 9.0" Bore, 9.75" Outside Diameter, 0.5" Width, 0.375" radial cross section. KAYDON JU090XP0 can accommodate radial, axial and moment loads simultaneously. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

  • J: AISI 52100 steel rings and balls, NBR seal on both sides
  • U: Radial cross section 0.375 inches, Width 0.5 inches
  • 090: Inner diameter 9.0 inches
  • X: Four-point contact ball bearing
  • P: One-piece, snap-type, stamped brass cage
  • 0: Tolerance to Kaydon class 1 (ABEC 1F)
Comments

Related products

NSK NBX22812DD N Series Inch Design Ball Bearings
NSK NBX22812DD

Brand: NSK
NBX22812DD, NSK, N Series Inch Design Ball Bearings, Four-point contact type

KAYDON JU090CP0 Reali-Slim thin section radial contact ball bearing with seals
KAYDON JU090CP0

Brand: KAYDON
JU090CP0 KAYDON, 9.0 in Bore, 9.75 in Outside Diameter, 0.5 in Width, Radial contact ball bearing (type C)

INA CSXU090-2RS-HLE Four-point contact bearing
INA CSXU090-2RS-HLE

Brand: INA
Four point contact bearing, Thin section bearing CSXU..-2RS, seals, brass sheet metal cage

INA CSCU090-2RS-HLE Deep groove ball bearing
INA CSCU090-2RS-HLE

Brand: INA
Deep groove ball bearing, Thin section bearing CSCU..-2RS, seals, brass sheet metal cage