KAYDON KG075AR0 bearings

KG075AR0 KAYDON, 7.5" Bore, 9.5" Outside Diameter, 1.0" Width, Thin section angular contact ball bearing

Reali-Slim thin section angular contact ball bearing

Measurement system: Inch
Bore diameter: 190.500 mm
Outside diameter: 241.300 mm
Width: 25.400 mm
Cr: 36900 N
C0r: 71700 N
Net weight: 2.77 kg
Number of rows: 1
Contact angle deg: 30
Sealing: Without
Cage: Brass
Bore type: Cylindrical
Outer diameter type: Cylindrical
Bearing material: Steel
Rolling material: Steel
Tolerance class: ABEC 1F

In stock

Technical specification for KAYDON KG075AR0

KAYDON KG075AR0
Dimensions
Part Number	KG075AR0
Type	Reali-Slim thin section angular contact ball bearing (type A)
Contact angle	30°
Cage	Brass
Material	Bearing steel
d	190.5 mm	Bore diameter
D	241.3 mm	Outside diameter
H	25.4 mm	Radial cross section
B	25.4 mm	Width
d₁	≈209.347 mm	Shoulder diameter inner ring
D₁	≈222.453 mm	Shoulder diameter outer ring
D₄	≈228.27 mm	Shoulder diameter outer ring
	12.7 mm	Ball diameter
	2.032 mm	Maximum radius of shaft or housing fillet
Calculation data
C_k	36.9 kN	Dynamic load rating, Kaydon, radial direction
C₀	71.7 kN	Basic static load rating, radial direction
C_0a	207.0 kN	Basic static load rating, axial direction

KAYDON KG075AR0, Reali-Slim thin section angular contact ball bearing (type A), KG series; 7.5" Bore, 9.5" Outside Diameter, 1.0" Width, 1.0" radial cross section. KAYDON KG075AR0 can accommodate radial and axial loads acting simultaneously, where the axial load acts in only one direction.

K: AISI 52100 Steel, No seals or shields
G: Radial cross section 1.0 inches, Width 1.0 inches
075: Inner diameter 7.5 inches
A: Angular contact ball bearing (not ground for universal matching)
R: One-piece, circular pocket, stamped brass cage
0: Tolerance to Kaydon class 1 (ABEC 1F)

Comments