KAYDON KF075XP0 bearings
Reali-Slim thin section four-point contact ball bearing, 7.5" ID, 9" OD, 0.75" Width
- Measurement system
- Inch
- Bore diameter
- 190.500 mm
- Outside diameter
- 228.600 mm
- Width
- 19.050 mm
- Cr
- 28100 N
- C0r
- 41400 N
- Net weight
- 1.54 kg
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Without
- Cage
- Brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- ABEC 1F
In stock
Technical specification for KAYDON KF075XP0
| Part Number | KF075XP0 | |
|---|---|---|
| Type | Reali-Slim thin section four-point contact ball bearing (type X) | |
| Contact angle | 30° | |
| Cage | Brass | |
| Material | Bearing steel | |
| Net weight | 1.54 kg | |
| Dimensions | ||
| d | 190.5 mm | Bore diameter |
| D | 228.6 mm | Outside diameter |
| H | 19.05 mm | Radial cross section |
| B | 19.05 mm | Width |
| d1 | ≈204.597 mm | Shoulder diameter inner ring |
| D1 | ≈214.503 mm | Shoulder diameter outer ring |
| 9.525 mm | Ball diameter | |
| 2.032 mm | Maximum radius of shaft or housing fillet | |
| Calculation data | ||
| Ck | 28.1 kN | Dynamic load rating, Kaydon, radial direction |
| C0 | 41.4 kN | Basic static load rating, radial direction |
| C0a | 104.0 kN | Basic static load rating, axial direction |
| CM | 2.211 kN•m | Basic dynamic load rating, moment |
| C0M | 104.0 kN•m | Basic static load rating, moment |
Kaydon KF075XP0, Reali-Slim thin section four-point contact ball bearing (type X), KF series, Radial cross section 19.05 mm, Brass cage. KAYDON KF075XP0 can accommodate radial and axial loads simultaneously, and require considerably less axial space than two angular contact ball bearings. KF075XP0 have thin cross section, light weight, low friction, high stiffness, and high running accuracy.
- K: AISI 52100 Steel, No seals or shields
- F: Radial cross section 0.75 inches, Width 0.75 inches
- 075: Inner diameter 7.5 inches
- X: Four-point contact ball bearing
- P: One-piece, snap-type, stamped brass cage
- 0: Tolerance to Kaydon class 1 (ABEC 1F)
- Log in to post comments
Related products
INA CSXF075-HLE
Brand: INA
Four point contact bearing, Thin section bearing CSXF, brass sheet metal cage
NSK NBX19019
Brand: NSK
NBX19019, NSK, N Series Inch Design Ball Bearings, Four-point contact type
NSK NBA19019
Brand: NSK
NBA19019, NSK, N Series Inch Design Ball Bearings, Angular contact type
KAYDON KF075CP0
Brand: KAYDON
Reali-Slim thin section radial contact ball bearing, 7.5" ID, 9" OD, 0.75" Width
KAYDON KF075AR0
Brand: KAYDON
Kaydon KF075AR0 Reali-Slim thin section angular contact ball bearing
NSK NBC19019
Brand: NSK
N Series inch design deep groove ball bearings