KAYDON KF050XP0 bearings
Reali-Slim thin section four-point contact ball bearing, 5" ID, 6.5" OD, 0.75" Width
- Measurement system
- Inch
- Bore diameter
- 127.000 mm
- Outside diameter
- 165.100 mm
- Width
- 19.050 mm
- Cr
- 23000 N
- C0r
- 28900 N
- Net weight
- 1.04 kg
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Without
- Cage
- Brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- ABEC 1F
In stock
Technical specification for KAYDON KF050XP0
| Part Number | KF050XP0 | |
|---|---|---|
| Type | Reali-Slim thin section four-point contact ball bearing (type X) | |
| Contact angle | 30° | |
| Cage | Brass | |
| Material | Bearing steel | |
| Net weight | 1.04 kg | |
| Dimensions | ||
| d | 127.0 mm | Bore diameter |
| D | 165.1 mm | Outside diameter |
| H | 19.05 mm | Radial cross section |
| B | 19.05 mm | Width |
| d1 | ≈141.097 mm | Shoulder diameter inner ring |
| D1 | ≈151.003 mm | Shoulder diameter outer ring |
| 9.525 mm | Ball diameter | |
| 2.032 mm | Maximum radius of shaft or housing fillet | |
| Calculation data | ||
| Ck | 23.0 kN | Dynamic load rating, Kaydon, radial direction |
| C0 | 28.9 kN | Basic static load rating, radial direction |
| C0a | 72.2 kN | Basic static load rating, axial direction |
| CM | 1.261 kN•m | Basic dynamic load rating, moment |
| C0M | 72.2 kN•m | Basic static load rating, moment |
Kaydon KF050XP0, Reali-Slim thin section four-point contact ball bearing (type X), KF series, Radial cross section 19.05 mm, Brass cage. KAYDON KF050XP0 can accommodate radial and axial loads simultaneously, and require considerably less axial space than two angular contact ball bearings. KF050XP0 have thin cross section, light weight, low friction, high stiffness, and high running accuracy.
- K: AISI 52100 Steel, No seals or shields
- F: Radial cross section 0.75 inches, Width 0.75 inches
- 050: Inner diameter 5 inches
- X: Four-point contact ball bearing
- P: One-piece, snap-type, stamped brass cage
- 0: Tolerance to Kaydon class 1 (ABEC 1F)
- Log in to post comments
Related products
NSK NBX12719
Brand: NSK
NBX12719, NSK, N Series Inch Design Ball Bearings, Four-point contact type
INA CSXF050-HLE
Brand: INA
Four point contact bearing, Thin section bearing CSXF, brass sheet metal cage
NSK NBA12719
Brand: NSK
NBA12719, NSK, N Series Inch Design Ball Bearings, Angular contact type
KAYDON KF050CP0
Brand: KAYDON
Reali-Slim thin section radial contact ball bearing, 5" ID, 6.5" OD, 0.75" Width
KAYDON KF050AR0
Brand: KAYDON
Kaydon KF050AR0 Reali-Slim thin section angular contact ball bearing
NSK NBC12719
Brand: NSK
N Series inch design deep groove ball bearings