KAYDON KAA15XL0 bearings

KAA15XL0 KAYDON, 1.5" Bore, 1.875" Outside Diameter, 0.188" Width, Thin section four-point contact ball bearing

Measurement system: Inch
Bore diameter: 38.100 mm
Outside diameter: 47.625 mm
Width: 4.763 mm
Cr: 1320 N
C0r: 1780 N
Net weight: 0.0181 kg
Number of rows: 1
Contact angle deg: 30
Sealing: Without
Cage: Non-metallic
Bore type: Cylindrical
Outer diameter type: Cylindrical
Bearing material: Steel
Rolling material: Steel
Tolerance class: ABEC 1F

In stock

Technical specification for KAYDON KAA15XL0

KAYDON KAA15XL0
Dimensions
Part Number	KAA15XL0
Type	Reali-Slim thin section four-point contact ball bearing (type X)
Contact angle	30°
Cage	Non-metallic
Material	Bearing steel
d	38.1 mm	Bore diameter
D	47.625 mm	Outside diameter
H	4.763 mm	Radial cross section
B	4.763 mm	Width
d₁	≈41.656 mm	Shoulder diameter inner ring
D₁	≈44.069 mm	Shoulder diameter outer ring
	2.381 mm	Ball diameter
	0.381 mm	Maximum radius of shaft or housing fillet
Calculation data
C_k	1.32 kN	Dynamic load rating, Kaydon, radial direction
C₀	1.78 kN	Basic static load rating, radial direction
C_0a	4.45 kN	Basic static load rating, axial direction
C_M	0.0211 kN·m	Basic dynamic load rating, moment
C_0M	0.0384 kN·m	Basic static load rating, moment

KAYDON KAA15XL0, Reali-Slim thin section four-point contact ball bearing (type X), KAA series; 1.5" Bore, 1.875" Outside Diameter, 0.188" Width, 0.188" radial cross section. KAYDON KAA15XL0 can accommodate radial, axial and moment loads simultaneously.

K: AISI 52100 Steel, No seals or shields
AA: Radial cross section 0.188 inches, Width 0.188 inches
15: Inner diameter 1.5 inches
X: Four-point contact ball bearing
L: One-piece, snap-type, PA12 cage
0: Tolerance to Kaydon class 1 (ABEC 1F)

Comments