KAYDON K19020AR0 bearings
K19020AR0 KAYDON, 190mm Bore, 230mm Outside Diameter, 20mm Width, Angular contact ball bearing (type A)


Reali-Slim thin section angular contact ball bearing
Measurement system
Metric
Bore diameter
190.000 mm
Outside diameter
230.000 mm
Width
20.000 mm
Cr
25500 N
C0r
55600 N
Net weight
1.52 kg
Number of rows
1
Contact angle deg
30
Sealing
Without
Cage
Brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
ABEC 1F

In stock


Technical specification for KAYDON K19020AR0

KAYDON K19020AR0
Part Number K19020AR0
Type Reali-Slim thin section angular contact ball bearing (type A)
Contact angle 30°
Cage Brass
Material Bearing steel
Dimensions
d 190.0 mm Bore diameter
D 230.0 mm Outside diameter
H 20.0 mm Radial cross section
B 19.99 mm Width
d1 ≈205.0 mm Shoulder diameter inner ring
D1 ≈215.0 mm Shoulder diameter outer ring
D4 ≈220.0 mm Shoulder diameter outer ring
9.525 mm Ball diameter
1.5 mm Maximum radius of shaft or housing fillet
Calculation data
Ck 25.5 kN Dynamic load rating, Kaydon, radial direction
C0 55.6 kN Basic static load rating, radial direction
C0a 160.0 kN Basic static load rating, axial direction
Reali-Slim thin section angular contact ball bearing

KAYDON K19020AR0, Reali-Slim thin section angular contact ball bearing (type A); 190.0mm Bore,230.0mm Outside Diameter, 19.99mm Width, 20.0mm radial cross section. KAYDON K19020AR0can accommodate radial and axial loads acting simultaneously, where the axial load acts in only one direction.

  • K: AISI 52100 Steel, No seals or shields
  • 190: bore diameter 190.0 mm
  • 20: Radial cross section 20.0 mm
  • A: Angular contact ball bearing (not ground for universal matching)
  • R: One-piece, circular pocket, stamped brass cage
  • 0: Tolerance to Kaydon class 1 (ABEC 1F)
Comments

Related products