KAYDON JU065CP0 bearings

JU065CP0 KAYDON, 6.5 in Bore, 7.25 in Outside Diameter, 0.5 in Width, Radial contact ball bearing (type C)

Measurement system: Inch
Bore diameter: 165.100 mm
Outside diameter: 184.150 mm
Width: 12.700 mm
Cr: 6210 N
C0r: 14700 N
Limiting speed: 1000 r/min
Net weight: 0.395 kg
Number of rows: 1
Contact angle deg: 0
Sealing: Seal on both sides
Cage: Brass
Bore type: Cylindrical
Outer diameter type: Cylindrical
Bearing material: Steel
Rolling material: Steel
Tolerance class: ABEC 1F
Lubricant in bearing: Grease
Relubrication feature: Without

In stock

Technical specification for KAYDON JU065CP0

KAYDON JU065CP0
Dimensions
Part Number	JU065CP0
Type	Reali-Slim thin section radial contact ball bearing with seals (type C)
Contact angle	0°
Cage	Brass
Sealing	Seal on both sides
Material	Bearing steel
d	165.1 mm	Bore diameter
D	184.15 mm	Outside diameter
H	9.525 mm	Radial cross section
B	12.7 mm	Width
d₂	≈168.91 mm	Recess diameter inner ring
D₂	≈178.892 mm	Recess diameter outer ring
	4.763 mm	Ball diameter
	0.381 mm	Maximum radius of shaft or housing fillet
Calculation data
C_k	6.21 kN	Dynamic load rating, Kaydon, radial direction
C₀	14.7 kN	Basic static load rating, radial direction
	0.791 N·m	Starting torque max. no load
	1000.0 r/min	Limiting speed

JU series, Radial contact ball bearing type C

KAYDON JU065CP0, Reali-Slim thin section radial contact ball bearing with seals; 6.5" Bore, 7.25" Outside Diameter, 0.5" Width, 0.375" radial cross section. KAYDON JU065CP0 are designed to accommodate radial loads and some axial loads in either direction. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

J: AISI 52100 steel rings and balls, NBR seal on both sides
U: Radial cross section 0.375 inches, Width 0.5 inches
065: Inner diameter 6.5 inches
C: Radial contact ball bearing
P: One-piece, snap-type, stamped brass cage
0: Tolerance to Kaydon class 1 (ABEC 1F)

Comments