KAYDON JU060CP0 bearings
JU060CP0 KAYDON, 6.0 in Bore, 6.75 in Outside Diameter, 0.5 in Width, Radial contact ball bearing (type C)
- Measurement system
- Inch
- Bore diameter
- 152.400 mm
- Outside diameter
- 171.450 mm
- Width
- 12.700 mm
- Cr
- 5950 N
- C0r
- 13700 N
- Limiting speed
- 1080 r/min
- Net weight
- 0.367 kg
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Seal on both sides
- Cage
- Brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- ABEC 1F
- Lubricant in bearing
- Grease
- Relubrication feature
- Without
In stock
Technical specification for KAYDON JU060CP0
| Part Number | JU060CP0 | |
|---|---|---|
| Type | Reali-Slim thin section radial contact ball bearing with seals (type C) | |
| Contact angle | 0° | |
| Cage | Brass | |
| Sealing | Seal on both sides | |
| Material | Bearing steel | |
| Dimensions | ||
| d | 152.4 mm | Bore diameter |
| D | 171.45 mm | Outside diameter |
| H | 9.525 mm | Radial cross section |
| B | 12.7 mm | Width |
| d2 | ≈156.21 mm | Recess diameter inner ring |
| D2 | ≈166.192 mm | Recess diameter outer ring |
| 4.763 mm | Ball diameter | |
| 0.381 mm | Maximum radius of shaft or housing fillet | |
| Calculation data | ||
| Ck | 5.95 kN | Dynamic load rating, Kaydon, radial direction |
| C0 | 13.7 kN | Basic static load rating, radial direction |
| 0.689 N·m | Starting torque max. no load | |
| 1080.0 r/min | Limiting speed | |
KAYDON JU060CP0, Reali-Slim thin section radial contact ball bearing with seals; 6.0" Bore, 6.75" Outside Diameter, 0.5" Width, 0.375" radial cross section. KAYDON JU060CP0 are designed to accommodate radial loads and some axial loads in either direction. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
- J: AISI 52100 steel rings and balls, NBR seal on both sides
- U: Radial cross section 0.375 inches, Width 0.5 inches
- 060: Inner diameter 6.0 inches
- C: Radial contact ball bearing
- P: One-piece, snap-type, stamped brass cage
- 0: Tolerance to Kaydon class 1 (ABEC 1F)
- Log in to post comments
Related products
NSK NBX15212DD
Brand: NSK
NBX15212DD, NSK, N Series Inch Design Ball Bearings, Four-point contact type
KAYDON JU060XP0
Brand: KAYDON
JU060XP0 KAYDON, 6.0 in Bore, 6.75 in Outside Diameter, 0.5 in Width, Four-point contact ball bearing (type X)
INA CSXU060-2RS-HLE
Brand: INA
Four point contact bearing, Thin section bearing CSXU..-2RS, seals, brass sheet metal cage
INA CSCU060-2RS-HLE
Brand: INA
Deep groove ball bearing, Thin section bearing CSCU..-2RS, seals, brass sheet metal cage