SKF NJG2305VH bearings
NJG2305VH single row full complement cylindrical roller bearing
- Measurement system
- Metric
- Bore diameter
- 25.000 mm
- Outside diameter
- 62.000 mm
- Width
- 24.000 mm
- Cr
- 68200 N
- C0r
- 68000 N
- Limiting speed
- 5600 r/min
- Net weight
- 0.381 kg
- Number of rows
- 1
- Sealing
- Without
- Cage
- Without
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Internal clearance
- CN
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for SKF NJG2305VH
| Part Number | NJG2305VH | |
|---|---|---|
| Description | Single row full complement cylindrical roller bearing, NJG design | |
| Axial displacement capability | In one direction | |
| Radial internal clearance | CN | |
| Number of rows | 1 | |
| Number of flanges, outer ring | 2 | |
| Number of flanges, inner ring | 1 | |
| Dimensions | ||
| d | 25.0 mm | Bore diameter |
| D | 62.0 mm | Outside diameter |
| B | 24.0 mm | Width |
| d1 | ≈ 36.1 mm | Shoulder diameter inner ring |
| D1 | ≈ 48.2 mm | Shoulder diameter outer ring |
| F | 31.74 mm | Raceway diameter inner ring |
| s | max. 1.7 mm | Permissible axial displacement from the normal position of one bearing ring relative to the other |
| r1,2 | min. 1.1 mm | Chamfer dimension |
| Abutment Dimensions | ||
| da | min. 31.0 mm | Abutment diameter shaft |
| das | 33.9 mm | Abutment diameter shaft |
| db | max. 30.0 mm | Abutment diameter shaft |
| Da | max. 55.0 mm | Abutment diameter housing |
| ra | max. 1.0 mm | Fillet radius |
| Calculation Data | ||
| C | 68.2 kN | Basic dynamic load rating |
| C0 | 68.0 kN | Basic static load rating |
| Pu | 8.5 kN | Fatigue load limit |
| 5600.0 r/min | Limiting speed | |
| 4500.0 r/min | Reference speed | |
| kr | 0.35 | Calculation factor |
| e | 0.3 | Limiting value |
| Y | 0.4 | Calculation factor |
NJG2305VH, Single row full complement cylindrical roller bearings are designed to accommodate very high radial loads in combination with moderate speeds. The bearings incorporate a maximum number of rollers as they are not equipped with a cage. Having two integral flanges on the outer ring and one on the inner ring, NJG design bearings can accommodate axial displacement in one direction. A self-retaining roller complement enables the bearing components to be separated, which facilitates mounting and enables the bearing components to be interchanged.
- Bore diameter: 25.0 mm
- Outside diameter: 62.0 mm
- Width: 24.0 mm
- Cage: Without
- Radial internal clearance: CN
- Log in to post comments