INA NATV5 bearings
Yoke type track rollers NATV, full complement needle roller set, with axial guidance, gap seals on both sides
- Measurement system
- Metric
- Bore diameter
- 5.000 mm
- Outside diameter
- 16.000 mm
- Width
- 12.000 mm
- Width, ourter ring
- 11.000 mm
- Width, inner ring
- 12.000 mm
- Cr
- 4850 N
- C0r
- 6700 N
- Limiting speed
- 3800 r/min
- Net weight
- 15.82 g
- Number of rows
- 1
- Sealing
- Seal on both sides
- Cage
- Without
- Bore type
- Cylindrical
- Outer diameter type
- Crowned
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Other
- Internal clearance
- Between C2 and CN
- Lubricant in bearing
- Grease
- Relubrication feature
- With
In stock
Technical specification for INA NATV5
| Part Number | NATV5 | |
|---|---|---|
| Main Dimensions & Performance Data | ||
| d | 5 mm | Bore diameter |
| D | 16 mm | Outside diameter |
| B | 12 mm | Width of the bearing |
| Cr w | 4850 N | Basic dynamic load rating, radial |
| C0r w | 6700 N | Basic static load rating, radial |
| Cur w | 970 N | Fatigue load limit, radial |
| nD G | 3800 1/min | Speed on permanent grease lubrication |
| F0r per | 6700 N | Permissible static load, radial |
| Fr per | 5600 N | Permissible dynamic load outer ring, radial |
| m | 15.82 g | Weight |
| Dimensions | ||
| C | 11 mm | Width, outer ring |
| d2 | 12.5 mm | Outside diameter of thrust washer |
| rmin | 0.15 mm | Minimum chamfer dimension |
INA NATV5 - Yoke type track rollers NATV, full complement needle roller set, with axial guidance, gap seals on both sides.
NATV5 INA is single row units mounted on shafts. It comprise thick-walled outer ring with a profiled outside surface and full complement needle roller sets. NATV5 INA can support high radial loads as well as axial loads arising from slight misalignment and skewed running.
- Log in to post comments
Related products
IKO NART5VR
Brand: IKO
NART 5 VR, Non-separable Roller Followers, Crowned outer ring, Full complement