IKO CRY56V bearings
CRY 56 V, Non-separable Roller Followers, Inch Series, Full complement
- Measurement system
- Inch
- Bore diameter
- 28.575 mm
- Outside diameter
- 88.900 mm
- Width
- 52.388 mm
- Width, ourter ring
- 50.800 mm
- Cr
- 111000 N
- C0r
- 239000 N
- Net weight
- 2160 g
- Number of rows
- 1
- Sealing
- Shield on both sides
- Cage
- Without
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Lubricant in bearing
- Grease
- Relubrication feature
- With
- Coating
- Black oxide surface treatment
In stock
Technical specification for IKO CRY56V
| Part Number | CRY 56 V | |
|---|---|---|
| Brand | IKO | |
| Type | Non-separable Roller Followers, Inch series | |
| Out ring profile | Cylindrical outer ring | |
| Cage | Full complement | |
| Seal | Shield type | |
| d | 28.575 mm | Boundary dimensions |
| D | 88.9 mm | |
| B | 52.388 mm | |
| C | 50.8 mm | |
| a | 61.9 mm | |
| r | 2.381 mm | |
| Push fit | Min. 28.522 mm | Shaft dia. |
| Max. 28.565 mm | ||
| Drive fit | Min. 28.572 mm | |
| Max. 28.585 mm | ||
| Press fit | Min. 28.583 mm | |
| Max. 28.595 mm | ||
| C | 111000 N | Basic dynamic load rating |
| C0 | 239000 N | Basic static load rating |
| Mass | 2160 g | |
IKO CRY 56 V Non-separable Roller Followers, Inch Series, Full Complement Type, Cylindrical outer ring, Shield type, Bore diameter 28.575 mm; Outside diameter 88.9 mm; Total width 52.388 mm; Width outer ring 50.8 mm.
- Log in to post comments