IKO CRY14VR bearings
CRY 14 VR, Non-separable Roller Followers, Inch Series, Full complement
- Measurement system
- Inch
- Bore diameter
- 6.350 mm
- Outside diameter
- 22.225 mm
- Width
- 14.288 mm
- Width, ourter ring
- 12.700 mm
- Cr
- 8710 N
- C0r
- 12300 N
- Net weight
- 34 g
- Number of rows
- 1
- Sealing
- Shield on both sides
- Cage
- Without
- Bore type
- Cylindrical
- Outer diameter type
- Crowner outer ring
- Bearing material
- Steel
- Rolling material
- Steel
- Lubricant in bearing
- Grease
- Relubrication feature
- With
- Coating
- Black oxide surface treatment
In stock
Technical specification for IKO CRY14VR
| Part Number | CRY 14 VR | |
|---|---|---|
| Brand | IKO | |
| Type | Non-separable Roller Followers, Inch series | |
| Out ring profile | Crowner outer ring | |
| Cage | Full complement | |
| Seal | Shield type | |
| d | 6.35 mm | Boundary dimensions |
| D | 22.225 mm | |
| B | 14.288 mm | |
| C | 12.7 mm | |
| a | 14.4 mm | |
| R | 250 mm | |
| Push fit | Min. 6.332 mm | Shaft dia. |
| Max. 6.342 mm | ||
| Drive fit | Min. 6.348 mm | |
| Max. 6.358 mm | ||
| Press fit | Min. 6.353 mm | |
| Max. 6.363 mm | ||
| C | 8710 N | Basic dynamic load rating |
| C0 | 12300 N | Basic static load rating |
| Mass | 34 g | |
IKO CRY 14 VR Non-separable Roller Followers, Inch Series, Full Complement Type, Crowner outer ring, Shield type, Bore diameter 6.35 mm; Outside diameter 22.225 mm; Total width 14.288 mm; Width outer ring 12.7 mm.
- Log in to post comments
Related products
IKO CRY14VUUR
Brand: IKO
CRY 14 VUUR, Non-separable Roller Followers, Inch Series, Full complement
IKO CRY14VUU
Brand: IKO
CRY 14 VUU, Non-separable Roller Followers, Inch Series, Full complement
IKO CRY14V
Brand: IKO
CRY 14 V, Non-separable Roller Followers, Inch Series, Full complement