IKO CRBFV2512ATUUT1 bearings
CRBFV2512ATUUT1, IKO, Mounting Holed Type Crossed Roller Bearings CRBFV, With Separator
- Bore diameter
- 25.000 mm
- Outside diameter
- 80.000 mm
- Total width
- 12.000 mm
- Cr
- 8610 N
- C0r
- 10600 N
- Net weight
- 0.4 kg
- Measurement system
- Metric
- Sealing
- Seal on both sides
- Cage
- spacer retainer
- Bearing material
- Steel
- Rolling material
- Steel
- Internal clearance
- Other
- Lubricant in bearing
- Grease
In stock
Technical specification for IKO CRBFV2512ATUUT1
| Part Number | CRBFV2512ATUUT1 | |
|---|---|---|
| Brand | IKO | |
| Type | Mounting Holed Type Crossed Roller Bearings | |
| Cage | With Separator | |
| Seal | Sealed type | |
| d | 25 mm | Boundary dimensions |
| D | 80 mm | |
| B | 12 mm | |
| r1 min. | 0.6 mm | |
| r2 min. | 0.6 mm | |
| PCD1 | 35 mm | Mounting holes |
| Inner ring Mounting holes | 6-M3 through | |
| PCD2 | 67 mm | |
| Outer ring Mounting holes | 6-Φ3.4 through Φ6.5 counter bore depth 3.3 | |
| da | 46.5 mm | Mounting dimensions |
| Da | 58.5 mm | |
| C | 8610 N | Basic dynamic load rating |
| C0 | 10600 N | Basic static load rating |
| Min. | -10 µm | Radial internal clearance T1 |
| Max. | 0 µm | |
| Mass | 0.4 kg | |
IKO CRBFV2512ATUUT1 is mounting holed type high rigidity crossed roller bearing with separator. Mounting holes are prepared on outer ring and inner ring providing easy mounting together with high rigidity and high accuracy.
- Log in to post comments