FAG 6315-H-2Z-SN bearings

Deep groove ball bearing 63..-H-2Z, single row, H-Series, shields, steel sheet metal cage

FAG deep groove ball bearing, H-Series, shields

Measurement system: Metric
Bore diameter: 75.000 mm
Outside diameter: 160.000 mm
Width: 37.000 mm
Cr: 113420 N
C0r: 76970 N
Limiting speed: 4850 r/min
Net weight: 3.07 kg
Number of rows: 1
Contact angle deg: 0
Sealing: Shield on both sides
Cage: Steel sheet metal
Bore type: Cylindrical
Outer diameter type: Cylindrical
Bearing material: Steel
Rolling material: Steel
Tolerance class: Normal (PN)
Internal clearance: CN
Lubricant in bearing: Grease

In stock

Technical specification for FAG 6315-H-2Z-SN

6315-H-2Z-SN FAG
Main Dimensions & Performance Data
Part Number	6315-H-2Z-SN
Cage	JN	steel sheet metal
Sealing	2Z	Non-contact shield on both sides
Tolerance class	PN	Normal (PN)
Radial internal clearance	CN (Group N)	Normal internal clearance
Lubricant	Lubricating grease	-
d	75 mm	Bore diameter
D	160 mm	Outside diameter
B	37 mm	Width
Cr	113420 N	Basic dynamic load rating, radial
C0r	76970 N	Basic static load rating, radial
Cur	4400 N	Fatigue load limit, radial
n_G	4850 1/min	Limiting speed
n_δ	5800 1/min	Reference speed
m	3.07 kg	Weight
Mounting dimensions
d_{a min}	87 mm	Minimum diameter shaft shoulder
D_{a max}	148 mm	Maximum diameter of housing shoulder
r_{a max}	2.1 mm	Maximum fillet radius
Dimensions
r_min	2.1 mm	Minimum chamfer dimension
D2	139.6 mm	Caliber diameter outer ring
d2	98.9 mm	Caliber diameter inner ring

FAG 6315-H-2Z-SN, Deep groove ball bearing 63..-H-2Z, single row, H-Series, shields, steel sheet metal cage, Bore diameter 75 mm, Outside diameter 160 mm, Width 37 mm.

Sealing: 2Z, Non-contact shield on both sides
Cage: JN, steel sheet metal
Tolerance: PN, Normal (PN)
Radial internal clearance: CN (Group N), Normal internal clearance

Comments