FAG 6017-H-2Z-SN bearings

Deep groove ball bearing 60..-H-2Z, single row, H-Series, shields, steel sheet metal cage

FAG deep groove ball bearing, H-Series, shields

Measurement system: Metric
Bore diameter: 85.000 mm
Outside diameter: 130.000 mm
Width: 22.000 mm
Cr: 52800 N
C0r: 44490 N
Limiting speed: 6000 r/min
Net weight: 0.853 kg
Number of rows: 1
Contact angle deg: 0
Sealing: Shield on both sides
Cage: Steel sheet metal
Bore type: Cylindrical
Outer diameter type: Cylindrical
Bearing material: Steel
Rolling material: Steel
Tolerance class: Normal (PN)
Internal clearance: CN
Lubricant in bearing: Grease

In stock

Technical specification for FAG 6017-H-2Z-SN

6017-H-2Z-SN FAG
Main Dimensions & Performance Data
Part Number	6017-H-2Z-SN
Cage	JN	steel sheet metal
Sealing	2Z	Non-contact shield on both sides
Tolerance class	PN	Normal (PN)
Radial internal clearance	CN (Group N)	Normal internal clearance
Lubricant	Lubricating grease	-
d	85 mm	Bore diameter
D	130 mm	Outside diameter
B	22 mm	Width
Cr	52800 N	Basic dynamic load rating, radial
C0r	44490 N	Basic static load rating, radial
Cur	2650 N	Fatigue load limit, radial
n_G	6000 1/min	Limiting speed
n_δ	5700 1/min	Reference speed
m	0.853 kg	Weight
Mounting dimensions
d_{a min}	91 mm	Minimum diameter shaft shoulder
D_{a max}	124 mm	Maximum diameter of housing shoulder
r_{a max}	1 mm	Maximum fillet radius
Dimensions
r_min	1.1 mm	Minimum chamfer dimension
D2	120.6 mm	Caliber diameter outer ring

FAG 6017-H-2Z-SN, Deep groove ball bearing 60..-H-2Z, single row, H-Series, shields, steel sheet metal cage, Bore diameter 85 mm, Outside diameter 130 mm, Width 22 mm.

Sealing: 2Z, Non-contact shield on both sides
Cage: JN, steel sheet metal
Tolerance: PN, Normal (PN)
Radial internal clearance: CN (Group N), Normal internal clearance

Comments