FAG 16100-A-2Z bearings
Deep groove ball bearing 161..-2Z, single row, shields, steel sheet metal cage
- Measurement system
- Metric
- Bore diameter
- 10.000 mm
- Outside diameter
- 28.000 mm
- Width
- 8.000 mm
- Cr
- 4580 N
- C0r
- 1970 N
- Limiting speed
- 34500 r/min
- Net weight
- 0.025 kg
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Shield on both sides
- Cage
- Steel sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Internal clearance
- CN
- Lubricant in bearing
- Grease
In stock
Technical specification for FAG 16100-A-2Z
| Part Number | 16100-A-2Z | |
|---|---|---|
| Cage | JN | steel sheet metal |
| Sealing | 2Z | Non-contact shield on both sides |
| Tolerance class | PN | Normal (PN) |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
| Lubricant | GA14 | Ball bearing grease, low noise, standard for D=62mm |
| Main Dimensions & Performance Data | ||
| d | 10 mm | Bore diameter |
| D | 28 mm | Outside diameter |
| B | 8 mm | Width |
| Cr | 4580 N | Basic dynamic load rating, radial |
| C0r | 1970 N | Basic static load rating, radial |
| Cur | 145 N | Fatigue load limit, radial |
| nG | 34500 1/min | Limiting speed |
| nδ | 28500 1/min | Reference speed |
| m | 0.025 kg | Weight |
| Mounting dimensions | ||
| da min | 12.4 mm | Minimum diameter shaft shoulder |
| Da max | 25.6 mm | Maximum diameter of housing shoulder |
| ra max | 0.3 mm | Maximum fillet radius |
| Dimensions | ||
| rmin | 0.3 mm | Minimum chamfer dimension |
| D1 | 21.08 mm | Shoulder diameter outer ring |
| D2 | 22.7 mm | Caliber diameter outer ring |
| d1 | 14.65 mm | Shoulder diameter inner ring |
FAG 16100-A-2Z, Deep groove ball bearing 161..-2Z, single row, shields, steel sheet metal cage, Bore diameter 10 mm, Outside diameter 28 mm, Width 8 mm.
- Sealing: 2Z, Non-contact shield on both sides
- Cage: JN, steel sheet metal
- Lubricant: GA14, Ball bearing grease, low noise, standard for D<=62mm
- Tolerance: PN, Normal (PN)
- Radial internal clearance: CN (Group N), Normal internal clearance
- Log in to post comments
Related products
SKF 16100-2Z
Brand: SKF
16100-2Z Deep groove ball bearing with shields