TIMKEN X33215-Y33215 bearings
Part Number X33215 - Y33215, Tapered Roller Bearings - TS (Tapered Single) Metric
- Measurement system
- Metric
- Bore diameter
- 75.000 mm
- Outside diameter
- 130.000 mm
- Width
- 41.000 mm
- Width, ourter ring
- 31.000 mm
- Width, inner ring
- 41.000 mm
- Cr
- 236000 N
- C0r
- 316000 N
- Net weight
- 2.20 Kg
- Number of rows
- 1
- Cage
- Steel sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
In stock
Technical specification for TIMKEN X33215-Y33215
| Part Number | X33215 - Y33215 |
|---|---|
| Series | 33215 |
| Cone Part Number | X33215 |
| Cup Part Number | Y33215 |
| Design Unit | Metric |
| Bearing Weight | 2.20 Kg 4.8 lb |
| Cage Material | Stamped Steel |
| Dimensions | |
| d - Bore | 75 mm 2.9528 in |
| D - Cup Outer Diameter | 130 mm 5.1181 in |
| B - Cone Width | 41 mm 1.6142 in |
| C - Cup Width | 31.000 mm 1.2205 in |
| T - Bearing Width | 41.000 mm 1.6142 in |
| Abutment and Fillet Dimensions | |
| R - Cone Backface "To Clear" Radius | 2.030 mm 0.08 in |
| r - Cup Backface "To Clear" Radius | 1.52 mm 0.06 in |
| da - Cone Frontface Backing Diameter | 83 mm 3.27 in |
| db - Cone Backface Backing Diameter | 89 mm 3.5 in |
| Da - Cup Frontface Backing Diameter | 125.00 mm 4.96 in |
| Db - Cup Backface Backing Diameter | 117.09 mm 4.61 in |
| Ab - Cage-Cone Frontface Clearance | 3.6 mm 0.14 in |
| Aa - Cage-Cone Backface Clearance | 3.6 mm 0.14 in |
| a - Effective Center Location | -8.6 mm -0.34 in |
| Basic Load Ratings | |
| C90 - Dynamic Radial Rating (90 million revolutions) | 61200 N 13800 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions) | 236000 N 53100 lbf |
| C0 - Static Radial Rating | 316000 N 71000 lbf |
| Ca90?- Dynamic Thrust Rating (90 million revolutions) | 44900 N 10100 lbf |
| Factors | |
| K - Factor | 1.37 |
| e - ISO Factor | 0.43 |
| Y - ISO Factor | 1.4 |
| G1 - Heat Generation Factor (Roller-Raceway) | 111.4 |
| G2 - Heat Generation Factor (Rib-Roller End) | 27 |
| Cg - Geometry Factor | 0.0874 |
Timken X33215 - Y33215, Tapered roller bearings, TS (Tapered Single), Metric, Dimensions: bore: 75 mm, Outer diameter: 130 mm, Bearing width: 41.000 mm.
- Log in to post comments