TIMKEN 33211 bearings

Part Number 33211, Tapered Roller Bearings - TS (Tapered Single) Metric

In stock

Technical specification for TIMKEN 33211

Timken 33211
Dimensions
Part Number	33211
Series	33211
Cone Part Number	X33211
Cup Part Number	Y33211
Design Unit	Metric
Bearing Weight	1.2 Kg 2.6 lb
Cage Material	Stamped Steel
d - Bore	55 mm 2.1654 in
D - Cup Outer Diameter	100 mm 3.9370 in
B - Cone Width	35.000 mm 1.3780 in
C - Cup Width	27 mm 1.063 in
T - Bearing Width	35.000 mm 1.3780 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	2.030 mm 0.08 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	62 mm 2.44 in
db - Cone Backface Backing Diameter	68 mm 2.68 in
Da - Cup Frontface Backing Diameter	97.00 mm 3.82 in
Db - Cup Backface Backing Diameter	88.90 mm 3.50 in
Ab - Cage-Cone Frontface Clearance	3.3 mm 0.13 in
Aa - Cage-Cone Backface Clearance	2.3 mm 0.09 in
a - Effective Center Location	-9.7 mm -0.38 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	49800 N 11200 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	192000 N 43200 lbf
C0 - Static Radial Rating	202000 N 45300 lbf
Ca90?- Dynamic Thrust Rating (90 million revolutions)	34100 N 7660 lbf
Factors
K - Factor	1.46
e - ISO Factor	0.4
Y - ISO Factor	1.5
G1 - Heat Generation Factor (Roller-Raceway)	59.3
G2 - Heat Generation Factor (Rib-Roller End)	17.2
Cg - Geometry Factor	0.101

Timken 33211, Tapered roller bearings, TS (Tapered Single), Metric, Dimensions: bore: 55 mm, Outer diameter: 100 mm, Bearing width: 35.000 mm.

Comments