TIMKEN 33205 bearings

Part Number 33205, Tapered Roller Bearings - TS (Tapered Single) Metric

In stock

Technical specification for TIMKEN 33205

Timken 33205
Dimensions
Part Number	33205
Series	33205
Cone Part Number	X33205
Cup Part Number	Y33205
Design Unit	Metric
Bearing Weight	0.2 Kg 0.5 lb
Cage Material	Stamped Steel
d - Bore	25 mm 0.9843 in
D - Cup Outer Diameter	52 mm 2.0472 in
B - Cone Width	22.000 mm 0.8661 in
C - Cup Width	18.000 mm 0.7087 in
T - Bearing Width	22.000 mm 0.8661 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.020 mm 0.04 in
r - Cup Backface "To Clear" Radius	1.02 mm 0.04 in
da - Cone Frontface Backing Diameter	30.5 mm 1.2 in
db - Cone Backface Backing Diameter	34 mm 1.34 in
Da - Cup Frontface Backing Diameter	49.53 mm 1.95 in
Db - Cup Backface Backing Diameter	44.45 mm 1.75 in
Ab - Cage-Cone Frontface Clearance	2.5 mm 0.1 in
Aa - Cage-Cone Backface Clearance	0.3 mm 0.01 in
a - Effective Center Location	-7.6 mm -0.3 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	16900 N 3810 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	65400 N 14700 lbf
C0 - Static Radial Rating	63600 N 14300 lbf
Ca90?- Dynamic Thrust Rating (90 million revolutions)	10200 N 2290 lbf
Factors
K - Factor	1.66
e - ISO Factor	0.35
Y - ISO Factor	1.71
G1 - Heat Generation Factor (Roller-Raceway)	13.4
G2 - Heat Generation Factor (Rib-Roller End)	8.6
Cg - Geometry Factor	0.0594

Timken 33205, Tapered roller bearings, TS (Tapered Single), Metric, Dimensions: bore: 25 mm, Outer diameter: 52 mm, Bearing width: 22.000 mm.

Comments