TIMKEN 33113 bearings

Part Number 33113, Tapered Roller Bearings - TS (Tapered Single) Metric

In stock

Technical specification for TIMKEN 33113

Timken 33113
Dimensions
Part Number	33113
Series	33113
Cone Part Number	X33113
Cup Part Number	Y33113
Design Unit	Metric
Bearing Weight	1.3 Kg 2.8 lb
Cage Material	Stamped Steel
d - Bore	65 mm 2.5591 in
D - Cup Outer Diameter	110 mm 4.3307 in
B - Cone Width	34.000 mm 1.3386 in
C - Cup Width	26.500 mm 1.0433 in
T - Bearing Width	34.000 mm 1.3386 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.060 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	73 mm 2.87 in
db - Cone Backface Backing Diameter	77 mm 3.03 in
Da - Cup Frontface Backing Diameter	106.17 mm 4.18 in
Db - Cup Backface Backing Diameter	99.06 mm 3.90 in
Ab - Cage-Cone Frontface Clearance	3 mm 0.12 in
Aa - Cage-Cone Backface Clearance	2 mm 0.08 in
a - Effective Center Location	-7.9 mm -0.31 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	43300 N 9730 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	167000 N 37500 lbf
C0 - Static Radial Rating	225000 N 50600 lbf
Ca90?- Dynamic Thrust Rating (90 million revolutions)	28700 N 6460 lbf
Factors
K - Factor	1.51
e - ISO Factor	0.39
Y - ISO Factor	1.55
G1 - Heat Generation Factor (Roller-Raceway)	80.1
G2 - Heat Generation Factor (Rib-Roller End)	24.5
Cg - Geometry Factor	0.11

Timken 33113, Tapered roller bearings, TS (Tapered Single), Metric, Dimensions: bore: 65 mm, Outer diameter: 110 mm, Bearing width: 34.000 mm.

Comments