TIMKEN 33112 bearings

Part Number 33112, Tapered Roller Bearings - TS (Tapered Single) Metric

In stock

Technical specification for TIMKEN 33112

Timken 33112
Dimensions
Part Number	33112
Series	33112
Cone Part Number	X33112
Cup Part Number	Y33112
Design Unit	Metric
Bearing Weight	0.9 Kg 2 lb
Cage Material	Stamped Steel
d - Bore	60 mm 2.3622 in
D - Cup Outer Diameter	100 mm 3.9370 in
B - Cone Width	30.000 mm 1.1811 in
C - Cup Width	23.000 mm 0.9055 in
T - Bearing Width	30.000 mm 1.1811 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.060 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	67 mm 2.64 in
db - Cone Backface Backing Diameter	72 mm 2.83 in
Da - Cup Frontface Backing Diameter	97.00 mm 3.82 in
Db - Cup Backface Backing Diameter	89.92 mm 3.54 in
Ab - Cage-Cone Frontface Clearance	3.3 mm 0.13 in
Aa - Cage-Cone Backface Clearance	1.8 mm 0.07 in
a - Effective Center Location	-6.4 mm -0.25 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	42000 N 9440 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	162000 N 36400 lbf
C0 - Static Radial Rating	180000 N 40500 lbf
Ca90?- Dynamic Thrust Rating (90 million revolutions)	28600 N 6420 lbf
Factors
K - Factor	1.47
e - ISO Factor	0.4
Y - ISO Factor	1.51
G1 - Heat Generation Factor (Roller-Raceway)	61.7
G2 - Heat Generation Factor (Rib-Roller End)	23.9
Cg - Geometry Factor	0.102

Timken 33112, Tapered roller bearings, TS (Tapered Single), Metric, Dimensions: bore: 60 mm, Outer diameter: 100 mm, Bearing width: 30.000 mm.

Comments