TIMKEN 33110 bearings

Part Number 33110, Tapered Roller Bearings - TS (Tapered Single) Metric

In stock

Technical specification for TIMKEN 33110

Timken 33110
Dimensions
Part Number	33110
Series	33110
Cone Part Number	X33110
Cup Part Number	Y33110
Design Unit	Metric
Bearing Weight	0.6 Kg 1.3 lb
Cage Material	Stamped Steel
d - Bore	50 mm 1.9685 in
D - Cup Outer Diameter	85 mm 3.3465 in
B - Cone Width	26.000 mm 1.0236 in
C - Cup Width	20.000 mm 0.7874 in
T - Bearing Width	26.000 mm 1.0236 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.060 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	57 mm 2.24 in
db - Cone Backface Backing Diameter	61 mm 2.4 in
Da - Cup Frontface Backing Diameter	83.06 mm 3.27 in
Db - Cup Backface Backing Diameter	75.95 mm 2.99 in
Ab - Cage-Cone Frontface Clearance	2 mm 0.08 in
Aa - Cage-Cone Backface Clearance	1.8 mm 0.07 in
a - Effective Center Location	-5.3 mm -0.21 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	29700 N 6680 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	115000 N 25800 lbf
C0 - Static Radial Rating	125000 N 28100 lbf
Ca90?- Dynamic Thrust Rating (90 million revolutions)	20900 N 4700 lbf
Factors
K - Factor	1.42
e - ISO Factor	0.41
Y - ISO Factor	1.46
G1 - Heat Generation Factor (Roller-Raceway)	40.6
G2 - Heat Generation Factor (Rib-Roller End)	20.7
Cg - Geometry Factor	0.0899

Timken 33110, Tapered roller bearings, TS (Tapered Single), Metric, Dimensions: bore: 50 mm, Outer diameter: 85 mm, Bearing width: 26.000 mm.

Comments