TIMKEN 33014 bearings

Part Number 33014, Tapered Roller Bearings - TS (Tapered Single) Metric

In stock

Technical specification for TIMKEN 33014

Timken 33014
Dimensions
Part Number	33014
Series	33014M
Cone Part Number	X33014M
Cup Part Number	Y33014M
Design Unit	Metric
Bearing Weight	1.1 Kg 2.4 lb
Cage Material	Stamped Steel
d - Bore	70 mm 2.7559 in
D - Cup Outer Diameter	110 mm 4.3307 in
B - Cone Width	31.000 mm 1.2205 in
C - Cup Width	25.500 mm 1.0039 in
T - Bearing Width	31.000 mm 1.2205 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.060 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	77 mm 3.03 in
db - Cone Backface Backing Diameter	79 mm 3.11 in
Da - Cup Frontface Backing Diameter	106.17 mm 4.18 in
Db - Cup Backface Backing Diameter	101.09 mm 3.98 in
Ab - Cage-Cone Frontface Clearance	3.6 mm 0.14 in
Aa - Cage-Cone Backface Clearance	1 mm 0.04 in
a - Effective Center Location	-8.6 mm -0.34 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	39800 N 8940 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	153000 N 34500 lbf
C0 - Static Radial Rating	236000 N 53000 lbf
Ca90?- Dynamic Thrust Rating (90 million revolutions)	19400 N 4360 lbf
Factors
K - Factor	2.05
e - ISO Factor	0.28
Y - ISO Factor	2.11
G1 - Heat Generation Factor (Roller-Raceway)	105.3
G2 - Heat Generation Factor (Rib-Roller End)	50.1
Cg - Geometry Factor	0.0985

Timken 33014, Tapered roller bearings, TS (Tapered Single), Metric, Dimensions: bore: 70 mm, Outer diameter: 110 mm, Bearing width: 31.000 mm.

Comments