TIMKEN 33013 bearings

Part Number 33013, Tapered Roller Bearings - TS (Tapered Single) Metric

In stock

Technical specification for TIMKEN 33013

Timken 33013
Dimensions
Part Number	33013
Series	33013M
Cone Part Number	X33013M
Cup Part Number	Y33013M
Design Unit	Metric
Bearing Weight	0.70 Kg 1.6 lb
Cage Material	Stamped Steel
d - Bore	65 mm 2.5591 in
D - Cup Outer Diameter	100 mm 3.9370 in
B - Cone Width	27.000 mm 1.0630 in
C - Cup Width	21.000 mm 0.8268 in
T - Bearing Width	27.000 mm 1.0630 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.060 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	70 mm 2.76 in
db - Cone Backface Backing Diameter	74 mm 2.91 in
Da - Cup Frontface Backing Diameter	97.00 mm 3.82 in
Db - Cup Backface Backing Diameter	90.93 mm 3.58 in
Ab - Cage-Cone Frontface Clearance	2.5 mm 0.1 in
Aa - Cage-Cone Backface Clearance	2 mm 0.08 in
a - Effective Center Location	-6.1 mm -0.24 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	32900 N 7390 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	127000 N 28500 lbf
C0 - Static Radial Rating	162000 N 36400 lbf
Ca90?- Dynamic Thrust Rating (90 million revolutions)	19600 N 4410 lbf
Factors
K - Factor	1.68
e - ISO Factor	0.35
Y - ISO Factor	1.72
G1 - Heat Generation Factor (Roller-Raceway)	72.4
G2 - Heat Generation Factor (Rib-Roller End)	36.1
Cg - Geometry Factor	0.0928

Timken 33013, Tapered roller bearings, TS (Tapered Single), Metric, Dimensions: bore: 65 mm, Outer diameter: 100 mm, Bearing width: 27.000 mm.

Comments