TIMKEN 33010 bearings

Part Number 33010, Tapered Roller Bearings - TS (Tapered Single) Metric

In stock

Technical specification for TIMKEN 33010

Timken 33010
Dimensions
Part Number	33010
Series	33010
Cone Part Number	X33010
Cup Part Number	Y33010
Design Unit	Metric
Bearing Weight	0.5 Kg 1 lb
Cage Material	Stamped Steel
d - Bore	50 mm 1.9685 in
D - Cup Outer Diameter	80 mm 3.1496 in
B - Cone Width	24.000 mm 0.9449 in
C - Cup Width	19.000 mm 0.7480 in
T - Bearing Width	24.000 mm 0.9449 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.020 mm 0.04 in
r - Cup Backface "To Clear" Radius	1.02 mm 0.04 in
da - Cone Frontface Backing Diameter	55 mm 2.17 in
db - Cone Backface Backing Diameter	57 mm 2.24 in
Da - Cup Frontface Backing Diameter	77.00 mm 3.05 in
Db - Cup Backface Backing Diameter	72.90 mm 2.87 in
Ab - Cage-Cone Frontface Clearance	2.5 mm 0.1 in
Aa - Cage-Cone Backface Clearance	0.8 mm 0.03 in
a - Effective Center Location	-6.6 mm -0.26 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	24800 N 5570 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	95500 N 21500 lbf
C0 - Static Radial Rating	112000 N 25300 lbf
Ca90?- Dynamic Thrust Rating (90 million revolutions)	13400 N 3020 lbf
Factors
K - Factor	1.85
e - ISO Factor	0.32
Y - ISO Factor	1.9
G1 - Heat Generation Factor (Roller-Raceway)	42.3
G2 - Heat Generation Factor (Rib-Roller End)	28
Cg - Geometry Factor	0.0836

Timken 33010, Tapered roller bearings, TS (Tapered Single), Metric, Dimensions: bore: 50 mm, Outer diameter: 80 mm, Bearing width: 24.000 mm.

Comments