TIMKEN 32215 bearings

Part Number 32215, Tapered Roller Bearings - TS (Tapered Single) Metric

In stock

Technical specification for TIMKEN 32215

Timken 32215
Dimensions
Part Number	32215
Series	32215M
Cone Part Number	X32215M
Cup Part Number	Y32215M
Design Unit	Metric
Bearing Weight	1.7 Kg 3.7 lb
Cage Material	Stamped Steel
d - Bore	75 mm 2.9528 in
D - Cup Outer Diameter	130 mm 5.1181 in
B - Cone Width	31.000 mm 1.2205 in
C - Cup Width	27 mm 1.063 in
T - Bearing Width	33.250 mm 1.3091 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	2.030 mm 0.08 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	84 mm 3.31 in
db - Cone Backface Backing Diameter	88 mm 3.46 in
Da - Cup Frontface Backing Diameter	125.00 mm 4.96 in
Db - Cup Backface Backing Diameter	117.09 mm 4.61 in
Ab - Cage-Cone Frontface Clearance	4.1 mm 0.16 in
Aa - Cage-Cone Backface Clearance	3 mm 0.12 in
a - Effective Center Location	-3.6 mm -0.14 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	51600 N 11600 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	199000 N 44800 lbf
C0 - Static Radial Rating	227000 N 51100 lbf
Ca90?- Dynamic Thrust Rating (90 million revolutions)	38500 N 8650 lbf
Factors
K - Factor	1.34
e - ISO Factor	0.44
Y - ISO Factor	1.38
G1 - Heat Generation Factor (Roller-Raceway)	87.5
G2 - Heat Generation Factor (Rib-Roller End)	26.9
Cg - Geometry Factor	0.0759

Timken 32215, Tapered roller bearings, TS (Tapered Single), Metric, Dimensions: bore: 75 mm, Outer diameter: 130 mm, Bearing width: 33.250 mm.

Comments