TIMKEN 32214 bearings

Part Number 32214, Tapered Roller Bearings - TS (Tapered Single) Metric

In stock

Technical specification for TIMKEN 32214

Timken 32214
Dimensions
Part Number	32214
Series	32214M
Cone Part Number	X32214M
Cup Part Number	Y32214M
Design Unit	Metric
Bearing Weight	1.6 Kg 3.6 lb
Cage Material	Stamped Steel
d - Bore	70 mm 2.7559 in
D - Cup Outer Diameter	125 mm 4.9213 in
B - Cone Width	31.000 mm 1.2205 in
C - Cup Width	27 mm 1.063 in
T - Bearing Width	33.250 mm 1.3091 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	2.030 mm 0.08 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	79 mm 3.11 in
db - Cone Backface Backing Diameter	82 mm 3.23 in
Da - Cup Frontface Backing Diameter	119.89 mm 4.72 in
Db - Cup Backface Backing Diameter	114.05 mm 4.49 in
Ab - Cage-Cone Frontface Clearance	4.1 mm 0.16 in
Aa - Cage-Cone Backface Clearance	2.8 mm 0.11 in
a - Effective Center Location	-4.6 mm -0.18 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	56000 N 12600 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	216000 N 48600 lbf
C0 - Static Radial Rating	224000 N 50400 lbf
Ca90?- Dynamic Thrust Rating (90 million revolutions)	40300 N 9060 lbf
Factors
K - Factor	1.39
e - ISO Factor	0.42
Y - ISO Factor	1.43
G1 - Heat Generation Factor (Roller-Raceway)	81.4
G2 - Heat Generation Factor (Rib-Roller End)	25.6
Cg - Geometry Factor	0.0733

Timken 32214, Tapered roller bearings, TS (Tapered Single), Metric, Dimensions: bore: 70 mm, Outer diameter: 125 mm, Bearing width: 33.250 mm.

Comments