TIMKEN 32004X bearings

Part Number 32004X, Tapered Roller Bearings - TS (Tapered Single) Metric

In stock

Technical specification for TIMKEN 32004X

Timken 32004X
Dimensions
Part Number	32004X
Series	32004X
Cone Part Number	X32004X
Cup Part Number	Y32004X
Design Unit	Metric
Bearing Weight	0.100 Kg 0.2 lb
Cage Material	Stamped Steel
d - Bore	20 mm 0.7874 in
D - Cup Outer Diameter	42 mm 1.6535 in
B - Cone Width	15.000 mm 0.5906 in
C - Cup Width	12.000 mm 0.4724 in
T - Bearing Width	15.000 mm 0.5906 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	0.640 mm 0.03 in
r - Cup Backface "To Clear" Radius	0.64 mm 0.03 in
da - Cone Frontface Backing Diameter	25.5 mm 1 in
db - Cone Backface Backing Diameter	26.5 mm 1.04 in
Da - Cup Frontface Backing Diameter	40.39 mm 1.59 in
Db - Cup Backface Backing Diameter	37.08 mm 1.46 in
Ab - Cage-Cone Frontface Clearance	2 mm 0.08 in
Aa - Cage-Cone Backface Clearance	-0.3 mm -0.01 in
a - Effective Center Location	-4.6 mm -0.18 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	8520 N 1920 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	32900 N 7390 lbf
C0 - Static Radial Rating	29400 N 6600 lbf
Ca90?- Dynamic Thrust Rating (90 million revolutions)	5460 N 1230 lbf
Factors
K - Factor	1.56
e - ISO Factor	0.37
Y - ISO Factor	1.6
G1 - Heat Generation Factor (Roller-Raceway)	6.2
G2 - Heat Generation Factor (Rib-Roller End)	6.1
Cg - Geometry Factor	0.0469

Timken 32004X, Tapered roller bearings, TS (Tapered Single), Metric, Dimensions: bore: 20 mm, Outer diameter: 42 mm, Bearing width: 15.000 mm.

Comments