SKF D/WR10-2RS1 bearings
D/WR10-2RS1 stainless steel deep groove ball bearing with sealing
- Measurement system
- Inch
- Bore diameter
- 15.875 mm
- Outside diameter
- 34.925 mm
- Width
- 8.733 mm
- Cr
- 4940 N
- C0r
- 3150 N
- Limiting speed
- 13000 r/min
- Net weight
- 0.0836 kg
- Number of rows
- 1
- Sealing
- Contact seal on both sides
- Cage
- Stainless steel sheet
- Bearing material
- Stainless steel
- Rolling material
- Stainless steel
- Internal clearance
- CN
- Lubricant in bearing
- Grease
- Relubrication feature
- Without
In stock
Technical specification for SKF D/WR10-2RS1
| Part Number | D/WR10-2RS1 | |
|---|---|---|
| Description | Stainless steel deep groove ball bearing | |
| Number of rows | 1 | |
| Cage | Stainless steel Sheet metal | |
| Material | Stainless steel | |
| Dimensions | ||
| d | 15.875 mm | Bore diameter |
| D | 34.925 mm | Outside diameter |
| B | 8.733 mm | Total width |
| d2 | ≈ 21.5 mm | Recess diameter |
| D2 | ≈ 30.8 mm | Recess diameter |
| r1,2 | min. 0.8 mm | Chamfer dimension |
| Abutment Dimensions | ||
| da | min. 20.5 mm | Diameter of shaft abutment |
| max. 21.0 mm | Diameter of shaft abutment | |
| Da | max. 31.0 mm | Diameter of housing abutment |
| ra | max. 0.8 mm | Radius of shaft or housing fillet |
| Calculation Data | ||
| C | 4.94 kN | Basic dynamic load rating |
| C0 | 3.15 kN | Basic static load rating |
| Pu | 0.137 kN | Fatigue load limit |
| 13000.0 r/min | Limiting speed | |
| kr | 0.025 | Minimum load factor |
| f0 | 14.1 | Calculation factor |
SKF D/WR10-2RS1, Stainless steel single row deep groove ball bearing with seals or shields on both sides, provide greater chemical and corrosion resistance. As with deep groove ball bearings generally, they are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
- Bore diameter: 15.875 mm
- Outside diameter: 34.925 mm
- Width: 8.733 mm
- Basic dynamic load rating: 4.94 kN
- Basic static load rating: 3.15 kN
- Log in to post comments