SKF 6301-2RSH bearings
6301-2RSH Single row deep groove ball bearing with seals, SKF Explorer
- Measurement system
- Metric
- Bore diameter
- 12.000 mm
- Outside diameter
- 37.000 mm
- Width
- 12.000 mm
- Cr
- 10100 N
- C0r
- 4150 N
- Limiting speed
- 14000 r/min
- Net weight
- 0.0602 kg
- Number of rows
- 1
- Sealing
- Contact seal on both sides
- Cage
- Steel sheet
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Class P6 (P6)
- Internal clearance
- CN
- Lubricant in bearing
- Grease
- Relubrication feature
- Without
In stock
Technical specification for SKF 6301-2RSH
| Part Number | 6301-2RSH | |
|---|---|---|
| Description | Deep groove ball bearing with seals, SKF Explorer | |
| Cage | Sheet metal | |
| Number of rows | 1 | |
| Sealing | Contact seal on both sides | |
| Dimensions | ||
| d | 12.0 mm | Bore diameter |
| D | 37.0 mm | Outside diameter |
| B | 12.0 mm | Width |
| d2 | ≈ 17.5 mm | Recess diameter |
| D2 | ≈ 31.48 mm | Recess diameter |
| r1,2 | min. 1.0 mm | Chamfer dimension |
| P6 and tighter width tolerance | ISO tolerance class for dimensions | |
| Abutment Dimensions | ||
| da | min. 17.6 mm | Diameter of shaft abutment |
| da | max. 17.8 mm | Diameter of shaft abutment |
| Da | max. 31.4 mm | Abutment diameter housing |
| ra | max. 1.0 mm | Radius of fillet |
| Calculation Data | ||
| C | 10.1 kN | Basic dynamic load rating |
| C0 | 4.15 kN | Basic static load rating |
| Pu | 0.176 kN | Fatigue load limit |
| 14000.0 r/min | Limiting speed | |
| kr | 0.03 | Minimum load factor |
| f0 | 11.0 | Calculation factor |
| Tolerances of run-out | ||
| tKia | 4.0 µm | Range of section height at inner ring of assembled bearing |
| tKea | 7.0 µm | Range of section height at outer ring of assembled bearing |
| P5 | ISO tolerance class for geometrical tolerances | |
6301-2RSH, Single row deep groove ball bearings with seals on one or both sides are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
- Bore diameter: 12.0 mm
- Outside diameter: 37.0 mm
- Width: 12.0 mm
- Cage: Sheet metal
- Radial internal clearance: CN
- ISO tolerance class for dimensions: P6 and tighter width tolerance
- ISO tolerance class for geometrical tolerances: P5
- Log in to post comments
Related products
SKF 6301-2RSH/C3
Brand: SKF
6301-2RSH/C3 Single row deep groove ball bearing with seals, SKF Explorer
NTN 6301LLB
Brand: NTN
6301LLB, Deep groove ball bearing, pressed steel cage, non-contact seals on both sides
NTN 6301LLH
Brand: NTN
6301LLH, Deep groove ball bearing, pressed steel cage, low torque sealed type
NTN 6301ZZ
Brand: NTN
6301ZZ, NTN Deep groove ball bearing with shielded ZZ
NTN 6301LLU
Brand: NTN
6301LLU, Deep groove ball bearing, pressed steel cage, contact seals on both sides
FAG 6301-2Z-L138
Brand: FAG
Deep groove ball bearing 63..-2Z, single row, shields, steel sheet metal cage
FAG 6301-2Z-L069
Brand: FAG
Deep groove ball bearing 63..-2Z, single row, shields, steel sheet metal cage
FAG 6301-2Z-L038
Brand: FAG
Deep groove ball bearing 63..-2Z, single row, shields, steel sheet metal cage
FAG 6301-H-2Z
Brand: FAG
Deep groove ball bearing 63..-H-2Z, single row, H-Series, shields, steel sheet metal cage