SKF 6207-2RS1/C3 bearings

6207-2RS1/C3 Single row deep groove ball bearing with seals, SKF Explorer

SKF deep groove ball bearing with seal on both sides, steel cage

Measurement system: Metric
Bore diameter: 35.000 mm
Outside diameter: 72.000 mm
Width: 17.000 mm
Cr: 27000 N
C0r: 15300 N
Limiting speed: 6300 r/min
Net weight: 0.29 kg
Number of rows: 1
Sealing: Contact seal on both sides
Cage: Steel sheet
Bearing material: Steel
Rolling material: Steel
Tolerance class: Class6 (P6)
Internal clearance: C3
Lubricant in bearing: Grease
Relubrication feature: Without

In stock

Technical specification for SKF 6207-2RS1/C3

SKF 6207-2RS1/C3
Dimensions
Part Number	6207-2RS1/C3
Description	Deep groove ball bearing with seals
Cage	Sheet metal
Radial internal clearance	C3
Number of rows	1
Sealing	Contact seal on both sides
d	35.0 mm	Bore diameter
t_Δdmp	-0.01 - 0 mm	Deviation limits of mid-range bore diameter
D	72.0 mm	Outside diameter
t_ΔDmp	-0.011 - 0 mm	Deviation limits of mid-range outside diameter
B	17.0 mm	Width
t_ΔBs	-0.06 - 0 mm	Deviation limits of ring width
d1	≈ 46.94 mm	Shoulder diameter
D2	≈ 62.69 mm	Recess diameter
r1,2	min. 1.1 mm	Chamfer dimension
	P6 and tighter width tolerance	ISO tolerance class for dimensions
Abutment Dimensions
da	min. 42.0 mm	Diameter of shaft abutment
da	max. 46.8 mm	Diameter of shaft abutment
Da	max. 65.0 mm	Diameter of housing abutment
ra	max. 1.0 mm	Radius of shaft or housing fillet
Calculation Data
C	27.0 kN	Basic dynamic load rating
C0	15.3 kN	Basic static load rating
Pu	0.655 kN	Fatigue load limit
	6300.0 r/min	Limiting speed
kr	0.025	Minimum load factor
f0	13.8	Calculation factor
Tolerances of run-out
t_Kia	10.0 µm	Range of section height at inner ring of assembled bearing
t_Kea	13.0 µm	Range of section height at outer ring of assembled bearing
	P6	ISO tolerance class for geometrical tolerances

SKF deep groove ball bearing with seal on both sides

6207-2RS1/C3, Single row deep groove ball bearings with seals or shields are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

Bore diameter: 35.0 mm
Outside diameter: 72.0 mm
Width: 17.0 mm
Cage: Steel sheet
Radial internal clearance: C3
ISO tolerance class for dimensions: P6 and tighter width tolerance
ISO tolerance class for geometrical tolerances: P6

Comments