SKF 61800-2RS1 bearings
61800-2RS1 Single row deep groove ball bearing with seals
- Measurement system
- Metric
- Bore diameter
- 10.000 mm
- Outside diameter
- 19.000 mm
- Width
- 5.000 mm
- Cr
- 1720 N
- C0r
- 830 N
- Limiting speed
- 22000 r/min
- Net weight
- 0.0054 kg
- Number of rows
- 1
- Sealing
- Contact seal on both sides
- Cage
- Steel sheet
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Class6 (P6)
- Internal clearance
- CN
- Lubricant in bearing
- Grease
- Relubrication feature
- Without
In stock
Technical specification for SKF 61800-2RS1
| Part Number | 61800-2RS1 | |
|---|---|---|
| Description | Deep groove ball bearing with seals | |
| Cage | Sheet metal | |
| Radial internal clearance | CN | |
| Number of rows | 1 | |
| Sealing | Contact seal on both sides | |
| Dimensions | ||
| d | 10.0 mm | Bore diameter |
| tΔdmp | -0.007 - 0 mm | Deviation limits of mid-range bore diameter |
| D | 19.0 mm | Outside diameter |
| tΔDmp | -0.008 - 0 mm | Deviation limits of mid-range outside diameter |
| B | 5.0 mm | Width |
| tΔBs | -0.12 - 0 mm | Deviation limits of ring width |
| d1 | ≈ mm | Shoulder diameter |
| D2 | ≈ 17.15 mm | Recess diameter |
| r1,2 | min. 0.3 mm | Chamfer dimension |
| P6 | ISO tolerance class for dimensions | |
| Abutment Dimensions | ||
| da | min. 11.8 mm | Diameter of shaft abutment |
| da | max. 11.8 mm | Diameter of shaft abutment |
| Da | max. 17.0 mm | Diameter of housing abutment |
| ra | max. 0.3 mm | Radius of shaft or housing fillet |
| Calculation Data | ||
| C | 1.72 kN | Basic dynamic load rating |
| C0 | 0.83 kN | Basic static load rating |
| Pu | 0.036 kN | Fatigue load limit |
| 22000.0 r/min | Limiting speed | |
| kr | 0.015 | Minimum load factor |
| f0 | 14.8 | Calculation factor |
| Tolerances of run-out | ||
| tKia | 6.0 µm | Range of section height at inner ring of assembled bearing |
| tKea | 9.0 µm | Range of section height at outer ring of assembled bearing |
| P6 | ISO tolerance class for geometrical tolerances | |
61800-2RS1, Single row deep groove ball bearings with seals or shields are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
- Bore diameter: 10.0 mm
- Outside diameter: 19.0 mm
- Width: 5.0 mm
- Cage: Steel sheet
- Radial internal clearance: CN
- ISO tolerance class for dimensions: P6
- ISO tolerance class for geometrical tolerances: P6
- Log in to post comments
Related products
NTN 6800LLB
Brand: NTN
6800LLB, Deep groove ball bearing, pressed steel cage, non-contact seals on both sides
NTN 6800ZZ
Brand: NTN
6800ZZ, NTN Deep groove ball bearing with shielded ZZ
NTN 6800LLU
Brand: NTN
6800LLU, Deep groove ball bearing, pressed steel cage, contact seals on both sides
SKF 61800-2Z
Brand: SKF
61800-2Z Deep groove ball bearing with shields
NSK 6800ZZ
Brand: NSK
6800ZZ, NSK, Deep groove ball bearings, Single-row, With Two Shielded