SKF 7209BE-2RZP bearings

7209 BE-2RZP Single row angular contact ball bearing

SKF angular contact ball bearing with seal

Measurement system: Metric
Bore diameter: 45.000 mm
Outside diameter: 85.000 mm
Width: 19.000 mm
Cr: 35800 N
C0r: 26000 N
Limiting speed: 7500 r/min
Net weight: 0.412 kg
Number of rows: 1
Contact angle deg: 40
Sealing: Seal on both sides
Cage: Resin cage
Bore type: Cylindrical
Outer diameter type: Cylindrical
Bearing material: Steel
Rolling material: Steel
Tolerance class: Normal (PN)
Lubricant in bearing: Grease
Relubrication feature: Without

In stock

Technical specification for SKF 7209BE-2RZP

SKF 7209 BE-2RZP
Dimensions
Part Number	7209 BE-2RZP
Description	Single row angular contact ball bearing P : Glass fibre reinforced PA66 cage, rolling element centred, 2RZ : NBR non-contact seal on both sides
Cage	Resin cage
Contact angle	40°
Number of rows	1
Sealing	Seal on both sides
d	45.0 mm	Bore diameter
D	85.0 mm	Outside diameter
B	19.0 mm	Width
d1	≈ 60.85 mm	Shoulder diameter of inner ring (large side face)
d2	≈ 52.68 mm	Shoulder diameter of inner ring (small side face)
D2	≈ 71.8 mm	Recess diameter of outer ring (large side face)
D5	≈ 79.9 mm	Recess diameter of outer ring (small side face)
a	37.0 mm	Distance side face to pressure point
r1,2	min. 1.1 mm	Chamfer dimension
r3,4	min. 0.6 mm	Chamfer dimension
Abutment Dimensions
da	min. 52.0 mm	Diameter of shaft abutment
da	max. 60.0 mm	Diameter of shaft abutment
Da	max. 78.0 mm	Abutment diameter housing
Db	max. 80.8 mm	Diameter of housing abutment
ra	max. 1.0 mm	Radius of fillet
rb	max. 0.6 mm	Radius of fillet
Calculation Data
C	35.8 kN	Basic dynamic load rating
C0	26.0 kN	Basic static load rating
Pu	1.12 kN	Fatigue load limit
	7500.0 r/min	Limiting speed
	9500.0 r/min	Reference speed

7209 BE-2RZP, Single row angular contact ball bearing, Bore diameter: 45.0 mm; Outside diameter: 85.0 mm; Width: 19.0 mm; Contact angle: 40°; Normal;.

SKF 7209 BE-2RZP, These single row angular contact ball bearings, with 40° contact angle and non-contact seals on both sides, accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They have a ball-centred glass-fibre reinforced PA66 cage. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.

Comments