NSK HR32924J bearings
HR32924J, NSK, Metric series tapered roller bearings
- Measurement system
- Metric
- Bore diameter
- 120.000 mm
- Outside diameter
- 165.000 mm
- Width
- 29.000 mm
- Width, ourter ring
- 23.000 mm
- Width, inner ring
- 29.000 mm
- Cr
- 198000 N
- C0r
- 291000 N
- Limiting speed
- 2600 r/min
- Net weight
- 1.8 kg
- Number of rows
- 1
- Sealing
- Without
- Cage
- Steel sheet metal
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for NSK HR32924J
| Parts Number | HR32924J | |
|---|---|---|
| Brand | NSK | |
| Boundary Dimensions | ||
| d | 120 mm | Bore diameter |
| D | 165 mm | Outside diameter |
| T | 29 mm | Total width |
| B | 29 mm | Width of inner ring |
| C | 23 mm | Width of outer ring |
| Cup r min. | 1.5 mm | Chamfer dimension of outer ring (Cup) |
| Cone r min. | 1.5 mm | Chamfer dimension of inner ring (Cone) |
| Basic Load Ratings | ||
| Cr | 198000 N | Basic Dynamic Load Rating |
| C0r | 291000 N | Basic Static Load Rating |
| Speeds | ||
| Grease | 1900 min-1 | Grease lubrication |
| Oil | 2600 min-1 | Oil-bath lubrication |
| Dimensions | ||
| a | 29.2 mm | Effective Load Center |
| Abutment and Fillet Dimensions | ||
| da min. | 131 mm | Diameter of shaft abutment |
| Db min. | 160 mm | Diameter of housing abutment |
| Da min. | 155 mm | Diameter of housing abutment |
| Da max. | 156 mm | Diameter of housing abutment |
| Sa | 6 mm | Minimum width of space required in housing on large side face |
| Sb | 6 mm | Minimum width of space required in housing on small side face |
| db max. | 129 mm | Diameter of shaft abutment |
| ra max. | 1.5 mm | Radius of shaft or housing fillet of inner ring |
| ra max. | 1.5 mm | Radius of shaft or housing fillet of outer ring |
| Mass | ||
| Weight | 1.8 kg (approx.) | |
HR32924J, NSK, Tapered roller bearings, Bore diameter: 120 mm; Outside diameter 165 mm; Total Width 29 mm.
NSK HR32924J, Tapered roller bearings are designed so the apices of the cones formed by the race ways of the cone and cup and the conical rollers all coincide at one point on the axis of the bearing. When a radial load is imposed, an axial force component occurs; therefore, it is necessary to use two bearings in opposition or some other multiple arrangement.
- Log in to post comments
Related products
SKF 32924
Brand: SKF
32924 single row tapered roller bearing
FAG 32924-XL
Brand: FAG
Tapered roller bearings 329, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs
FAG 32924
Brand: FAG
Tapered roller bearings 329, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs