NSK HR32919J bearings
HR32919J, NSK, Metric series tapered roller bearings
- Measurement system
- Metric
- Bore diameter
- 95.000 mm
- Outside diameter
- 130.000 mm
- Width
- 23.000 mm
- Width, ourter ring
- 18.000 mm
- Width, inner ring
- 23.000 mm
- Cr
- 120000 N
- C0r
- 172000 N
- Limiting speed
- 3400 r/min
- Net weight
- 0.877 kg
- Number of rows
- 1
- Sealing
- Without
- Cage
- Steel sheet metal
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for NSK HR32919J
| Parts Number | HR32919J | |
|---|---|---|
| Brand | NSK | |
| Boundary Dimensions | ||
| d | 95 mm | Bore diameter |
| D | 130 mm | Outside diameter |
| T | 23 mm | Total width |
| B | 23 mm | Width of inner ring |
| C | 18 mm | Width of outer ring |
| Cup r min. | 1.5 mm | Chamfer dimension of outer ring (Cup) |
| Cone r min. | 1.5 mm | Chamfer dimension of inner ring (Cone) |
| Basic Load Ratings | ||
| Cr | 120000 N | Basic Dynamic Load Rating |
| C0r | 172000 N | Basic Static Load Rating |
| Speeds | ||
| Grease | 2400 min-1 | Grease lubrication |
| Oil | 3400 min-1 | Oil-bath lubrication |
| Dimensions | ||
| a | 23.2 mm | Effective Load Center |
| Abutment and Fillet Dimensions | ||
| da min. | 106 mm | Diameter of shaft abutment |
| Db min. | 125 mm | Diameter of housing abutment |
| Da min. | 121 mm | Diameter of housing abutment |
| Da max. | 121 mm | Diameter of housing abutment |
| Sa | 5 mm | Minimum width of space required in housing on large side face |
| Sb | 5 mm | Minimum width of space required in housing on small side face |
| db max. | 102 mm | Diameter of shaft abutment |
| ra max. | 1.5 mm | Radius of shaft or housing fillet of inner ring |
| ra max. | 1.5 mm | Radius of shaft or housing fillet of outer ring |
| Mass | ||
| Weight | 0.877 kg (approx.) | |
HR32919J, NSK, Tapered roller bearings, Bore diameter: 95 mm; Outside diameter 130 mm; Total Width 23 mm.
NSK HR32919J, Tapered roller bearings are designed so the apices of the cones formed by the race ways of the cone and cup and the conical rollers all coincide at one point on the axis of the bearing. When a radial load is imposed, an axial force component occurs; therefore, it is necessary to use two bearings in opposition or some other multiple arrangement.
- Log in to post comments
Related products
SKF 32919
Brand: SKF
32919 single row tapered roller bearing
FAG 32919-H
Brand: FAG
Tapered roller bearings 329, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs
FAG 32919
Brand: FAG
Tapered roller bearings 329, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs