NSK HR32316J bearings
HR32316J, NSK, Metric series tapered roller bearings
- Measurement system
- Metric
- Bore diameter
- 80.000 mm
- Outside diameter
- 170.000 mm
- Width
- 61.500 mm
- Width, ourter ring
- 48.000 mm
- Width, inner ring
- 58.000 mm
- Cr
- 470000 N
- C0r
- 505000 N
- Limiting speed
- 3000 r/min
- Net weight
- 6.35 kg
- Number of rows
- 1
- Sealing
- Without
- Cage
- Steel sheet metal
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for NSK HR32316J
| Parts Number | HR32316J | |
|---|---|---|
| Brand | NSK | |
| Boundary Dimensions | ||
| d | 80 mm | Bore diameter |
| D | 170 mm | Outside diameter |
| T | 61.5 mm | Total width |
| B | 58 mm | Width of inner ring |
| C | 48 mm | Width of outer ring |
| Cup r min. | 2.5 mm | Chamfer dimension of outer ring (Cup) |
| Cone r min. | 3 mm | Chamfer dimension of inner ring (Cone) |
| Basic Load Ratings | ||
| Cr | 470000 N | Basic Dynamic Load Rating |
| C0r | 505000 N | Basic Static Load Rating |
| Speeds | ||
| Grease | 2200 min-1 | Grease lubrication |
| Oil | 3000 min-1 | Oil-bath lubrication |
| Dimensions | ||
| a | 41.3 mm | Effective Load Center |
| Abutment and Fillet Dimensions | ||
| da min. | 101 mm | Diameter of shaft abutment |
| Db min. | 159 mm | Diameter of housing abutment |
| Da min. | 143 mm | Diameter of housing abutment |
| Da max. | 158 mm | Diameter of housing abutment |
| Sa | 4 mm | Minimum width of space required in housing on large side face |
| Sb | 13.5 mm | Minimum width of space required in housing on small side face |
| db max. | 98 mm | Diameter of shaft abutment |
| ra max. | 2.5 mm | Radius of shaft or housing fillet of inner ring |
| ra max. | 2 mm | Radius of shaft or housing fillet of outer ring |
| Mass | ||
| Weight | 6.35 kg (approx.) | |
HR32316J, NSK, Tapered roller bearings, Bore diameter: 80 mm; Outside diameter 170 mm; Total Width 61.5 mm.
NSK HR32316J, Tapered roller bearings are designed so the apices of the cones formed by the race ways of the cone and cup and the conical rollers all coincide at one point on the axis of the bearing. When a radial load is imposed, an axial force component occurs; therefore, it is necessary to use two bearings in opposition or some other multiple arrangement.
- Log in to post comments
Related products
SKF 32316B
Brand: SKF
32316B single row tapered roller bearing
SKF 32316
Brand: SKF
32316 single row tapered roller bearing
NSK HR32316CJ
Brand: NSK
HR32316CJ, NSK, Metric series tapered roller bearings
FAG 32316-XL
Brand: FAG
Tapered roller bearings 323, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs
FAG 32316-H
Brand: FAG
Tapered roller bearings 323, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs
FAG 32316-B
Brand: FAG
Tapered roller bearings 323, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs
FAG 32316-A
Brand: FAG
Tapered roller bearings 323, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs
TIMKEN 32316
Brand: TIMKEN
Part Number 32316, Tapered Roller Bearings - TS (Tapered Single) Metric