NSK HR31321J bearings
HR31321J, NSK, Metric series tapered roller bearings
- Measurement system
- Metric
- Bore diameter
- 105.000 mm
- Outside diameter
- 225.000 mm
- Width
- 58.000 mm
- Width, ourter ring
- 36.000 mm
- Width, inner ring
- 53.000 mm
- Cr
- 510000 N
- C0r
- 540000 N
- Limiting speed
- 2000 r/min
- Net weight
- 10 kg
- Number of rows
- 1
- Sealing
- Without
- Cage
- Steel sheet metal
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for NSK HR31321J
| Parts Number | HR31321J | |
|---|---|---|
| Brand | NSK | |
| Boundary Dimensions | ||
| d | 105 mm | Bore diameter |
| D | 225 mm | Outside diameter |
| T | 58 mm | Total width |
| B | 53 mm | Width of inner ring |
| C | 36 mm | Width of outer ring |
| Cup r min. | 3 mm | Chamfer dimension of outer ring (Cup) |
| Cone r min. | 4 mm | Chamfer dimension of inner ring (Cone) |
| Basic Load Ratings | ||
| Cr | 510000 N | Basic Dynamic Load Rating |
| C0r | 540000 N | Basic Static Load Rating |
| Speeds | ||
| Grease | 1500 min-1 | Grease lubrication |
| Oil | 2000 min-1 | Oil-bath lubrication |
| Dimensions | ||
| a | 70.2 mm | Effective Load Center |
| Abutment and Fillet Dimensions | ||
| da min. | 141 mm | Diameter of shaft abutment |
| Db min. | 211 mm | Diameter of housing abutment |
| Da min. | 177 mm | Diameter of housing abutment |
| Da max. | 211 mm | Diameter of housing abutment |
| Sa | 7 mm | Minimum width of space required in housing on large side face |
| Sb | 22 mm | Minimum width of space required in housing on small side face |
| db max. | 130 mm | Diameter of shaft abutment |
| ra max. | 3 mm | Radius of shaft or housing fillet of inner ring |
| ra max. | 2.5 mm | Radius of shaft or housing fillet of outer ring |
| Mass | ||
| Weight | 10 kg (approx.) | |
HR31321J, NSK, Tapered roller bearings, Bore diameter: 105 mm; Outside diameter 225 mm; Total Width 58 mm.
NSK HR31321J, Tapered roller bearings are designed so the apices of the cones formed by the race ways of the cone and cup and the conical rollers all coincide at one point on the axis of the bearing. When a radial load is imposed, an axial force component occurs; therefore, it is necessary to use two bearings in opposition or some other multiple arrangement.
- Log in to post comments
Related products
FAG 31321-X-XL
Brand: FAG
Tapered roller bearings 313, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs