NSK HR30328J bearings
HR30328J, NSK, Metric series tapered roller bearings
- Measurement system
- Metric
- Bore diameter
- 140.000 mm
- Outside diameter
- 300.000 mm
- Width
- 67.750 mm
- Width, ourter ring
- 53.000 mm
- Width, inner ring
- 62.000 mm
- Cr
- 910000 N
- C0r
- 945000 N
- Limiting speed
- 1700 r/min
- Net weight
- 21.1 kg
- Number of rows
- 1
- Sealing
- Without
- Cage
- Steel sheet metal
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for NSK HR30328J
| Parts Number | HR30328J | |
|---|---|---|
| Brand | NSK | |
| Boundary Dimensions | ||
| d | 140 mm | Bore diameter |
| D | 300 mm | Outside diameter |
| T | 67.75 mm | Total width |
| B | 62 mm | Width of inner ring |
| C | 53 mm | Width of outer ring |
| Cup r min. | 4 mm | Chamfer dimension of outer ring (Cup) |
| Cone r min. | 5 mm | Chamfer dimension of inner ring (Cone) |
| Basic Load Ratings | ||
| Cr | 910000 N | Basic Dynamic Load Rating |
| C0r | 945000 N | Basic Static Load Rating |
| Speeds | ||
| Grease | 1200 min-1 | Grease lubrication |
| Oil | 1700 min-1 | Oil-bath lubrication |
| Dimensions | ||
| a | 55.7 mm | Effective Load Center |
| Abutment and Fillet Dimensions | ||
| da min. | 167 mm | Diameter of shaft abutment |
| Db min. | 273 mm | Diameter of housing abutment |
| Da min. | 256 mm | Diameter of housing abutment |
| Da max. | 282 mm | Diameter of housing abutment |
| Sa | 9 mm | Minimum width of space required in housing on large side face |
| Sb | 14.5 mm | Minimum width of space required in housing on small side face |
| db max. | 177 mm | Diameter of shaft abutment |
| ra max. | 4 mm | Radius of shaft or housing fillet of inner ring |
| ra max. | 3 mm | Radius of shaft or housing fillet of outer ring |
| Mass | ||
| Weight | 21.1 kg (approx.) | |
HR30328J, NSK, Tapered roller bearings, Bore diameter: 140 mm; Outside diameter 300 mm; Total Width 67.75 mm.
NSK HR30328J, Tapered roller bearings are designed so the apices of the cones formed by the race ways of the cone and cup and the conical rollers all coincide at one point on the axis of the bearing. When a radial load is imposed, an axial force component occurs; therefore, it is necessary to use two bearings in opposition or some other multiple arrangement.
- Log in to post comments
Related products
NSK 30328
Brand: NSK
30328, NSK, Metric series tapered roller bearings
FAG 30328-XL
Brand: FAG
Tapered roller bearings 303, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs
FAG 30328
Brand: FAG
Tapered roller bearings 303, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs