NSK HR30322J bearings
HR30322J, NSK, Metric series tapered roller bearings
- Measurement system
- Metric
- Bore diameter
- 110.000 mm
- Outside diameter
- 240.000 mm
- Width
- 54.500 mm
- Width, ourter ring
- 42.000 mm
- Width, inner ring
- 50.000 mm
- Cr
- 595000 N
- C0r
- 595000 N
- Limiting speed
- 2000 r/min
- Net weight
- 11 kg
- Number of rows
- 1
- Sealing
- Without
- Cage
- Steel sheet metal
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for NSK HR30322J
| Parts Number | HR30322J | |
|---|---|---|
| Brand | NSK | |
| Boundary Dimensions | ||
| d | 110 mm | Bore diameter |
| D | 240 mm | Outside diameter |
| T | 54.5 mm | Total width |
| B | 50 mm | Width of inner ring |
| C | 42 mm | Width of outer ring |
| Cup r min. | 3 mm | Chamfer dimension of outer ring (Cup) |
| Cone r min. | 4 mm | Chamfer dimension of inner ring (Cone) |
| Basic Load Ratings | ||
| Cr | 595000 N | Basic Dynamic Load Rating |
| C0r | 595000 N | Basic Static Load Rating |
| Speeds | ||
| Grease | 1500 min-1 | Grease lubrication |
| Oil | 2000 min-1 | Oil-bath lubrication |
| Dimensions | ||
| a | 45.1 mm | Effective Load Center |
| Abutment and Fillet Dimensions | ||
| da min. | 131 mm | Diameter of shaft abutment |
| Db min. | 220 mm | Diameter of housing abutment |
| Da min. | 208 mm | Diameter of housing abutment |
| Da max. | 226 mm | Diameter of housing abutment |
| Sa | 6 mm | Minimum width of space required in housing on large side face |
| Sb | 12.5 mm | Minimum width of space required in housing on small side face |
| db max. | 143 mm | Diameter of shaft abutment |
| ra max. | 3 mm | Radius of shaft or housing fillet of inner ring |
| ra max. | 2.5 mm | Radius of shaft or housing fillet of outer ring |
| Mass | ||
| Weight | 11 kg (approx.) | |
HR30322J, NSK, Tapered roller bearings, Bore diameter: 110 mm; Outside diameter 240 mm; Total Width 54.5 mm.
NSK HR30322J, Tapered roller bearings are designed so the apices of the cones formed by the race ways of the cone and cup and the conical rollers all coincide at one point on the axis of the bearing. When a radial load is imposed, an axial force component occurs; therefore, it is necessary to use two bearings in opposition or some other multiple arrangement.
- Log in to post comments
Related products
SKF 30322
Brand: SKF
30322 single row tapered roller bearing
FAG 30322-XL
Brand: FAG
Tapered roller bearings 303, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs
FAG 30322-A
Brand: FAG
Tapered roller bearings 303, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs