NSK HR30319DJ bearings
HR30319DJ, NSK, Metric series tapered roller bearings
- Measurement system
- Metric
- Bore diameter
- 95.000 mm
- Outside diameter
- 200.000 mm
- Width
- 49.500 mm
- Width, ourter ring
- 32.000 mm
- Width, inner ring
- 45.000 mm
- Cr
- 380000 N
- C0r
- 375000 N
- Limiting speed
- 2400 r/min
- Net weight
- 6.64 kg
- Number of rows
- 1
- Sealing
- Without
- Cage
- Steel sheet metal
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for NSK HR30319DJ
| Parts Number | HR30319DJ | |
|---|---|---|
| Brand | NSK | |
| Boundary Dimensions | ||
| d | 95 mm | Bore diameter |
| D | 200 mm | Outside diameter |
| T | 49.5 mm | Total width |
| B | 45 mm | Width of inner ring |
| C | 32 mm | Width of outer ring |
| Cup r min. | 3 mm | Chamfer dimension of outer ring (Cup) |
| Cone r min. | 4 mm | Chamfer dimension of inner ring (Cone) |
| Basic Load Ratings | ||
| Cr | 380000 N | Basic Dynamic Load Rating |
| C0r | 375000 N | Basic Static Load Rating |
| Speeds | ||
| Grease | 1700 min-1 | Grease lubrication |
| Oil | 2400 min-1 | Oil-bath lubrication |
| Dimensions | ||
| a | 61.9 mm | Effective Load Center |
| Abutment and Fillet Dimensions | ||
| da min. | 123 mm | Diameter of shaft abutment |
| Db min. | 187 mm | Diameter of housing abutment |
| Da min. | 158 mm | Diameter of housing abutment |
| Da max. | 186 mm | Diameter of housing abutment |
| Sa | 6 mm | Minimum width of space required in housing on large side face |
| Sb | 17.5 mm | Minimum width of space required in housing on small side face |
| db max. | 115 mm | Diameter of shaft abutment |
| ra max. | 3 mm | Radius of shaft or housing fillet of inner ring |
| ra max. | 2.5 mm | Radius of shaft or housing fillet of outer ring |
| Mass | ||
| Weight | 6.64 kg (approx.) | |
HR30319DJ, NSK, Tapered roller bearings, Bore diameter: 95 mm; Outside diameter 200 mm; Total Width 49.5 mm.
NSK HR30319DJ, Tapered roller bearings are designed so the apices of the cones formed by the race ways of the cone and cup and the conical rollers all coincide at one point on the axis of the bearing. When a radial load is imposed, an axial force component occurs; therefore, it is necessary to use two bearings in opposition or some other multiple arrangement.
- Log in to post comments
Related products
NSK 30319CA
Brand: NSK
30319CA, NSK, Metric series tapered roller bearings
NSK HR30319J
Brand: NSK
HR30319J, NSK, Metric series tapered roller bearings
FAG 30319-H
Brand: FAG
Tapered roller bearings 303, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs
FAG 30319-A
Brand: FAG
Tapered roller bearings 303, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs