NSK HR30317DJ bearings
HR30317DJ, NSK, Metric series tapered roller bearings
- Measurement system
- Metric
- Bore diameter
- 85.000 mm
- Outside diameter
- 180.000 mm
- Width
- 44.500 mm
- Width, ourter ring
- 28.000 mm
- Width, inner ring
- 41.000 mm
- Cr
- 320000 N
- C0r
- 315000 N
- Limiting speed
- 2600 r/min
- Net weight
- 4.88 kg
- Number of rows
- 1
- Sealing
- Without
- Cage
- Steel sheet metal
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for NSK HR30317DJ
| Parts Number | HR30317DJ | |
|---|---|---|
| Brand | NSK | |
| Boundary Dimensions | ||
| d | 85 mm | Bore diameter |
| D | 180 mm | Outside diameter |
| T | 44.5 mm | Total width |
| B | 41 mm | Width of inner ring |
| C | 28 mm | Width of outer ring |
| Cup r min. | 3 mm | Chamfer dimension of outer ring (Cup) |
| Cone r min. | 4 mm | Chamfer dimension of inner ring (Cone) |
| Basic Load Ratings | ||
| Cr | 320000 N | Basic Dynamic Load Rating |
| C0r | 315000 N | Basic Static Load Rating |
| Speeds | ||
| Grease | 1900 min-1 | Grease lubrication |
| Oil | 2600 min-1 | Oil-bath lubrication |
| Dimensions | ||
| a | 55.3 mm | Effective Load Center |
| Abutment and Fillet Dimensions | ||
| da min. | 113 mm | Diameter of shaft abutment |
| Db min. | 169 mm | Diameter of housing abutment |
| Da min. | 144 mm | Diameter of housing abutment |
| Da max. | 166 mm | Diameter of housing abutment |
| Sa | 6 mm | Minimum width of space required in housing on large side face |
| Sb | 16.5 mm | Minimum width of space required in housing on small side face |
| db max. | 103 mm | Diameter of shaft abutment |
| ra max. | 3 mm | Radius of shaft or housing fillet of inner ring |
| ra max. | 2.5 mm | Radius of shaft or housing fillet of outer ring |
| Mass | ||
| Weight | 4.88 kg (approx.) | |
HR30317DJ, NSK, Tapered roller bearings, Bore diameter: 85 mm; Outside diameter 180 mm; Total Width 44.5 mm.
NSK HR30317DJ, Tapered roller bearings are designed so the apices of the cones formed by the race ways of the cone and cup and the conical rollers all coincide at one point on the axis of the bearing. When a radial load is imposed, an axial force component occurs; therefore, it is necessary to use two bearings in opposition or some other multiple arrangement.
- Log in to post comments
Related products
NSK HR30317J
Brand: NSK
HR30317J, NSK, Metric series tapered roller bearings
FAG 30317-H
Brand: FAG
Tapered roller bearings 303, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs
FAG 30317-A
Brand: FAG
Tapered roller bearings 303, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs