NSK HR30234J bearings
HR30234J, NSK, Metric series tapered roller bearings
- Measurement system
- Metric
- Bore diameter
- 170.000 mm
- Outside diameter
- 310.000 mm
- Width
- 57.000 mm
- Width, ourter ring
- 43.000 mm
- Width, inner ring
- 52.000 mm
- Cr
- 775000 N
- C0r
- 885000 N
- Limiting speed
- 1500 r/min
- Net weight
- 29.2 kg
- Number of rows
- 1
- Sealing
- Without
- Cage
- Steel sheet metal
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for NSK HR30234J
| Parts Number | HR30234J | |
|---|---|---|
| Brand | NSK | |
| Boundary Dimensions | ||
| d | 170 mm | Bore diameter |
| D | 310 mm | Outside diameter |
| T | 57 mm | Total width |
| B | 52 mm | Width of inner ring |
| C | 43 mm | Width of outer ring |
| Cup r min. | 4 mm | Chamfer dimension of outer ring (Cup) |
| Cone r min. | 5 mm | Chamfer dimension of inner ring (Cone) |
| Basic Load Ratings | ||
| Cr | 775000 N | Basic Dynamic Load Rating |
| C0r | 885000 N | Basic Static Load Rating |
| Speeds | ||
| Grease | 1100 min-1 | Grease lubrication |
| Oil | 1500 min-1 | Oil-bath lubrication |
| Dimensions | ||
| a | 59.4 mm | Effective Load Center |
| Abutment and Fillet Dimensions | ||
| da min. | 197 mm | Diameter of shaft abutment |
| Db min. | 288 mm | Diameter of housing abutment |
| Da min. | 273 mm | Diameter of housing abutment |
| Da max. | 292 mm | Diameter of housing abutment |
| Sa | 8 mm | Minimum width of space required in housing on large side face |
| Sb | 14 mm | Minimum width of space required in housing on small side face |
| db max. | 202 mm | Diameter of shaft abutment |
| ra max. | 4 mm | Radius of shaft or housing fillet of inner ring |
| ra max. | 3 mm | Radius of shaft or housing fillet of outer ring |
| Mass | ||
| Weight | 29.2 kg (approx.) | |
HR30234J, NSK, Tapered roller bearings, Bore diameter: 170 mm; Outside diameter 310 mm; Total Width 57 mm.
NSK HR30234J, Tapered roller bearings are designed so the apices of the cones formed by the race ways of the cone and cup and the conical rollers all coincide at one point on the axis of the bearing. When a radial load is imposed, an axial force component occurs; therefore, it is necessary to use two bearings in opposition or some other multiple arrangement.
- Log in to post comments
Related products
SKF 30234
Brand: SKF
30234 single row tapered roller bearing
FAG 30234-XL
Brand: FAG
Tapered roller bearings 302, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs
FAG 30234-A
Brand: FAG
Tapered roller bearings 302, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs