NSK HR30226J bearings
HR30226J, NSK, Metric series tapered roller bearings
- Measurement system
- Metric
- Bore diameter
- 130.000 mm
- Outside diameter
- 230.000 mm
- Width
- 43.750 mm
- Width, ourter ring
- 34.000 mm
- Width, inner ring
- 40.000 mm
- Cr
- 460000 N
- C0r
- 505000 N
- Limiting speed
- 2000 r/min
- Net weight
- 7.25 kg
- Number of rows
- 1
- Sealing
- Without
- Cage
- Steel sheet metal
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for NSK HR30226J
| Parts Number | HR30226J | |
|---|---|---|
| Brand | NSK | |
| Boundary Dimensions | ||
| d | 130 mm | Bore diameter |
| D | 230 mm | Outside diameter |
| T | 43.75 mm | Total width |
| B | 40 mm | Width of inner ring |
| C | 34 mm | Width of outer ring |
| Cup r min. | 3 mm | Chamfer dimension of outer ring (Cup) |
| Cone r min. | 4 mm | Chamfer dimension of inner ring (Cone) |
| Basic Load Ratings | ||
| Cr | 460000 N | Basic Dynamic Load Rating |
| C0r | 505000 N | Basic Static Load Rating |
| Speeds | ||
| Grease | 1500 min-1 | Grease lubrication |
| Oil | 2000 min-1 | Oil-bath lubrication |
| Dimensions | ||
| a | 45.8 mm | Effective Load Center |
| Abutment and Fillet Dimensions | ||
| da min. | 151 mm | Diameter of shaft abutment |
| Db min. | 217 mm | Diameter of housing abutment |
| Da min. | 205 mm | Diameter of housing abutment |
| Da max. | 216 mm | Diameter of housing abutment |
| Sa | 7 mm | Minimum width of space required in housing on large side face |
| Sb | 9.5 mm | Minimum width of space required in housing on small side face |
| db max. | 151 mm | Diameter of shaft abutment |
| ra max. | 3 mm | Radius of shaft or housing fillet of inner ring |
| ra max. | 2.5 mm | Radius of shaft or housing fillet of outer ring |
| Mass | ||
| Weight | 7.25 kg (approx.) | |
HR30226J, NSK, Tapered roller bearings, Bore diameter: 130 mm; Outside diameter 230 mm; Total Width 43.75 mm.
NSK HR30226J, Tapered roller bearings are designed so the apices of the cones formed by the race ways of the cone and cup and the conical rollers all coincide at one point on the axis of the bearing. When a radial load is imposed, an axial force component occurs; therefore, it is necessary to use two bearings in opposition or some other multiple arrangement.
- Log in to post comments
Related products
SKF 30226
Brand: SKF
30226 single row tapered roller bearing
FAG 30226-XL
Brand: FAG
Tapered roller bearings 302, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs
FAG 30226-A
Brand: FAG
Tapered roller bearings 302, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs