NSK 32930 bearings
32930, NSK, Metric series tapered roller bearings
- Measurement system
- Metric
- Bore diameter
- 150.000 mm
- Outside diameter
- 210.000 mm
- Width
- 38.000 mm
- Width, ourter ring
- 31.000 mm
- Width, inner ring
- 36.000 mm
- Cr
- 305000 N
- C0r
- 440000 N
- Limiting speed
- 2000 r/min
- Net weight
- 3.8 kg
- Number of rows
- 1
- Sealing
- Without
- Cage
- Steel sheet metal
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for NSK 32930
| Parts Number | 32930 | |
|---|---|---|
| Brand | NSK | |
| Boundary Dimensions | ||
| d | 150 mm | Bore diameter |
| D | 210 mm | Outside diameter |
| T | 38 mm | Total width |
| B | 36 mm | Width of inner ring |
| C | 31 mm | Width of outer ring |
| Cup r min. | 2 mm | Chamfer dimension of outer ring (Cup) |
| Cone r min. | 2.5 mm | Chamfer dimension of inner ring (Cone) |
| Basic Load Ratings | ||
| Cr | 305000 N | Basic Dynamic Load Rating |
| C0r | 440000 N | Basic Static Load Rating |
| Speeds | ||
| Grease | 1500 min-1 | Grease lubrication |
| Oil | 2000 min-1 | Oil-bath lubrication |
| Dimensions | ||
| a | 36.7 mm | Effective Load Center |
| Abutment and Fillet Dimensions | ||
| da min. | 165 mm | Diameter of shaft abutment |
| Db min. | 201 mm | Diameter of housing abutment |
| Da min. | 195 mm | Diameter of housing abutment |
| Da max. | 200 mm | Diameter of housing abutment |
| Sa | 7 mm | Minimum width of space required in housing on large side face |
| Sb | 7 mm | Minimum width of space required in housing on small side face |
| db max. | 162 mm | Diameter of shaft abutment |
| ra max. | 2 mm | Radius of shaft or housing fillet of inner ring |
| ra max. | 2 mm | Radius of shaft or housing fillet of outer ring |
| Mass | ||
| Weight | 3.8 kg (approx.) | |
32930, NSK, Tapered roller bearings, Bore diameter: 150 mm; Outside diameter 210 mm; Total Width 38 mm.
NSK 32930, Tapered roller bearings are designed so the apices of the cones formed by the race ways of the cone and cup and the conical rollers all coincide at one point on the axis of the bearing. When a radial load is imposed, an axial force component occurs; therefore, it is necessary to use two bearings in opposition or some other multiple arrangement.
- Log in to post comments
Related products
NSK HR32930J
Brand: NSK
HR32930J, NSK, Metric series tapered roller bearings
SKF 32930
Brand: SKF
32930 single row tapered roller bearing
FAG 32930
Brand: FAG
Tapered roller bearings 329, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs