NSK 32332 bearings
32332, NSK, Metric series tapered roller bearings
- Measurement system
- Metric
- Bore diameter
- 160.000 mm
- Outside diameter
- 340.000 mm
- Width
- 121.000 mm
- Width, ourter ring
- 95.000 mm
- Width, inner ring
- 114.000 mm
- Cr
- 1480000 N
- C0r
- 1770000 N
- Limiting speed
- 1400 r/min
- Net weight
- 48.3 kg
- Number of rows
- 1
- Sealing
- Without
- Cage
- Steel sheet metal
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for NSK 32332
| Parts Number | 32332 | |
|---|---|---|
| Brand | NSK | |
| Boundary Dimensions | ||
| d | 160 mm | Bore diameter |
| D | 340 mm | Outside diameter |
| T | 121 mm | Total width |
| B | 114 mm | Width of inner ring |
| C | 95 mm | Width of outer ring |
| Cup r min. | 4 mm | Chamfer dimension of outer ring (Cup) |
| Cone r min. | 5 mm | Chamfer dimension of inner ring (Cone) |
| Basic Load Ratings | ||
| Cr | 1480000 N | Basic Dynamic Load Rating |
| C0r | 1770000 N | Basic Static Load Rating |
| Speeds | ||
| Grease | 1000 min-1 | Grease lubrication |
| Oil | 1400 min-1 | Oil-bath lubrication |
| Dimensions | ||
| a | 87.1 mm | Effective Load Center |
| Abutment and Fillet Dimensions | ||
| da min. | 192 mm | Diameter of shaft abutment |
| Db min. | 319 mm | Diameter of housing abutment |
| Da min. | 281 mm | Diameter of housing abutment |
| Da max. | 322 mm | Diameter of housing abutment |
| Sa | 10 mm | Minimum width of space required in housing on large side face |
| Sb | 26 mm | Minimum width of space required in housing on small side face |
| db max. | 202 mm | Diameter of shaft abutment |
| ra max. | 4 mm | Radius of shaft or housing fillet of inner ring |
| ra max. | 3 mm | Radius of shaft or housing fillet of outer ring |
| Mass | ||
| Weight | 48.3 kg (approx.) | |
32332, NSK, Tapered roller bearings, Bore diameter: 160 mm; Outside diameter 340 mm; Total Width 121 mm.
NSK 32332, Tapered roller bearings are designed so the apices of the cones formed by the race ways of the cone and cup and the conical rollers all coincide at one point on the axis of the bearing. When a radial load is imposed, an axial force component occurs; therefore, it is necessary to use two bearings in opposition or some other multiple arrangement.
- Log in to post comments