NSK 30334D bearings
30334D, NSK, Metric series tapered roller bearings
- Measurement system
- Metric
- Bore diameter
- 170.000 mm
- Outside diameter
- 360.000 mm
- Width
- 80.000 mm
- Width, ourter ring
- 50.000 mm
- Width, inner ring
- 72.000 mm
- Cr
- 935000 N
- C0r
- 1040000 N
- Limiting speed
- 1200 r/min
- Net weight
- 33.4 kg
- Number of rows
- 1
- Sealing
- Without
- Cage
- Steel sheet metal
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for NSK 30334D
| Parts Number | 30334D | |
|---|---|---|
| Brand | NSK | |
| Boundary Dimensions | ||
| d | 170 mm | Bore diameter |
| D | 360 mm | Outside diameter |
| T | 80 mm | Total width |
| B | 72 mm | Width of inner ring |
| C | 50 mm | Width of outer ring |
| Cup r min. | 4 mm | Chamfer dimension of outer ring (Cup) |
| Cone r min. | 5 mm | Chamfer dimension of inner ring (Cone) |
| Basic Load Ratings | ||
| Cr | 935000 N | Basic Dynamic Load Rating |
| C0r | 1040000 N | Basic Static Load Rating |
| Speeds | ||
| Grease | 900 min-1 | Grease lubrication |
| Oil | 1200 min-1 | Oil-bath lubrication |
| Dimensions | ||
| a | 107.3 mm | Effective Load Center |
| Abutment and Fillet Dimensions | ||
| da min. | 206 mm | Diameter of shaft abutment |
| Db min. | 332 mm | Diameter of housing abutment |
| Da min. | 288 mm | Diameter of housing abutment |
| Da max. | 342 mm | Diameter of housing abutment |
| Sa | 10 mm | Minimum width of space required in housing on large side face |
| Sb | 30 mm | Minimum width of space required in housing on small side face |
| db max. | 215 mm | Diameter of shaft abutment |
| ra max. | 4 mm | Radius of shaft or housing fillet of inner ring |
| ra max. | 3 mm | Radius of shaft or housing fillet of outer ring |
| Mass | ||
| Weight | 33.4 kg (approx.) | |
30334D, NSK, Tapered roller bearings, Bore diameter: 170 mm; Outside diameter 360 mm; Total Width 80 mm.
NSK 30334D, Tapered roller bearings are designed so the apices of the cones formed by the race ways of the cone and cup and the conical rollers all coincide at one point on the axis of the bearing. When a radial load is imposed, an axial force component occurs; therefore, it is necessary to use two bearings in opposition or some other multiple arrangement.
- Log in to post comments
Related products
NSK 30334
Brand: NSK
30334, NSK, Metric series tapered roller bearings
NSK HR30334J
Brand: NSK
HR30334J, NSK, Metric series tapered roller bearings