INA NNTR130X310X146-2ZL bearings
Yoke type track roller NNTR..-2ZL, CRB, full complement roller set, two-row, with inner ring
- Measurement system
- Metric
- Bore diameter
- 130.000 mm
- Outside diameter
- 310.000 mm
- Width
- 146.000 mm
- Width, ourter ring
- 144.000 mm
- Width, inner ring
- 146.000 mm
- Cr
- 990000 N
- C0r
- 1650000 N
- Limiting speed
- 240 r/min
- Net weight
- 65.6 kg
- Number of rows
- 2
- Sealing
- Seal on both sides
- Cage
- Without
- Bore type
- Cylindrical
- Outer diameter type
- Crowned
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Other
- Internal clearance
- Between C2 and CN
- Lubricant in bearing
- Grease
- Relubrication feature
- With
In stock
Technical specification for INA NNTR130X310X146-2ZL
| Part Number | NNTR130X310X146-2ZL | |
|---|---|---|
| Replaces | NNTR 130X310X146.2ZL | |
| Main Dimensions & Performance Data | ||
| d | 130 mm | Bore diameter |
| D | 310 mm | Outside diameter |
| B | 146 mm | Width, inner ring |
| Cr w | 990000 N | Basic dynamic load rating, radial |
| C0r w | 1650000 N | Basic static load rating, radial |
| Cur w | 227000 N | Fatigue load limit, radial |
| nD G | 240 1/min | Speed on permanent grease lubrication |
| F0r per | 1650000 N | Permissible static load, radial |
| Fr per | 1280000 N | Permissible dynamic load outer ring, radial |
| m | 65.6 kg | Weight |
| Mounting dimensions | ||
| d2 | 165 mm | Stop diameter of thrust washer |
| D1 | 204 mm | Mounting dimension |
| d3 | 8 mm | Diameter lubrication hole |
| R | 15000 mm | Radius of outer ring outside profile |
| 6 | Number of lubrication holes | |
| Mounting dimensions | ||
| C | 144 mm | Width, outer ring |
| rmin | 5 mm | Minimum chamfer dimension |
| r1 min | 3 mm | Minimum chamfer dimension |
INA NNTR130X310X146-2ZL - Yoke type track roller NNTR..-2ZL, CRB, full complement roller set, two-row, with inner ring, 3 ribs on outer ring, not pallet changer.
NNTR130X310X146-2ZL INA is ready-to-fit cylindrical roller bearings of double row design. It have particularly thick-walled outer ring with a crowned outside surface . NNTR130X310X146-2ZL INA can support high radial loads and tolerate axial loads which are due to small misalignments, skewed running or temporary contact running impacts.
- Log in to post comments