INA NATR10-PP bearings
Yoke type track rollers NATR..-PP, with axial guidance, axial plain washers on both sides
- Measurement system
- Metric
- Bore diameter
- 10.000 mm
- Outside diameter
- 30.000 mm
- Width
- 15.000 mm
- Width, ourter ring
- 14.000 mm
- Width, inner ring
- 15.000 mm
- Cr
- 6800 N
- C0r
- 8700 N
- Limiting speed
- 5500 r/min
- Net weight
- 59.758 g
- Number of rows
- 1
- Sealing
- Seal on both sides
- Cage
- Steel sheet
- Bore type
- Cylindrical
- Outer diameter type
- Crowned
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Other
- Internal clearance
- Between C2 and CN
- Lubricant in bearing
- Grease
- Relubrication feature
- With
In stock
Technical specification for INA NATR10-PP
| Part Number | NATR10-PP | |
|---|---|---|
| Relubrication feature | Via inner ring | |
| Main Dimensions & Performance Data | ||
| d | 10 mm | Bore diameter |
| D | 30 mm | Outside diameter |
| B | 15 mm | Width, inner ring |
| Cr w | 6800 N | Basic dynamic load rating, radial |
| C0r w | 8700 N | Basic static load rating, radial |
| Cur w | 1240 N | Fatigue load limit, radial |
| nD G | 5500 1/min | Speed on permanent grease lubrication |
| F0r per | 8700 N | Permissible static load, radial |
| Fr per | 8700 N | Permissible dynamic load outer ring, radial |
| m | 59.758 g | Weight |
| Dimensions | ||
| C | 14 mm | Width, outer ring |
| d2 | 23 mm | Outside diameter of thrust washer |
| rmin | 0.6 mm | Minimum chamfer dimension |
INA NATR10-PP - Yoke type track rollers NATR..-PP, with axial guidance, axial plain washers on both sides.
NATR10-PP INA is single row units mounted on shafts. It comprise thick-walled outer ring with a profiled outside surface and needle roller and cage assemblies. NATR10-PP INA can support high radial loads as well as axial loads arising from slight misalignment and skewed running.
In NATR10-PP, axial guidance is provided directly by contact washers.
- Log in to post comments
Related products
INA NATR10
Brand: INA
Yoke type track rollers NATR, with axial guidance, gap seals on both sides
IKO NART10UUR
Brand: IKO
NART 10 UUR, Non-separable Roller Followers, Crowned outer Ring, Sealed type
IKO NART10R
Brand: IKO
NART 10 R, Non-separable Roller Followers, Crowned outer ring, Shield type